Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: riscv64_riscv64
Installed-Size: 61440
Filename: ahcpd_0.53-r3_riscv64_riscv64.ipk
Size: 24980
SHA256sum: 9c0420c661da30aac690d9f22763c8bc763a19f5081b008279551dc847618d8a
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 71680
Filename: alfred_2024.3-r1_riscv64_riscv64.ipk
Size: 29793
SHA256sum: 20f9730adc08721c15ff492c98b9e840fa476403800538537b0e464721f13ffb
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_riscv64_riscv64.ipk
Size: 4989
SHA256sum: 101c1283c367b6db4781099bd35dba8c730924dac5cae4b17666d2e82d08295c
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: riscv64_riscv64
Installed-Size: 143360
Filename: babeld_1.13.1-r2_riscv64_riscv64.ipk
Size: 73222
SHA256sum: 67c20ad233753f69a3d18743bc2d4ed0e9e2a22e5b2fb82434072d2649502143
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 112640
Filename: batctl-default_2024.3-r1_riscv64_riscv64.ipk
Size: 48505
SHA256sum: 6ed9fcd9da85bf9c4027986b414258cdcd90c9ad7b30a36d57ea30ea4453e11d
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 122880
Filename: batctl-full_2024.3-r1_riscv64_riscv64.ipk
Size: 54957
SHA256sum: fcbf566462ffa85ce4344a066a5a01c4e4aa203a76fe950035570b3edfab5278
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 51200
Filename: batctl-tiny_2024.3-r1_riscv64_riscv64.ipk
Size: 17261
SHA256sum: 97a6f7b325ded323a8971858363e4631936e45cf56bd5692a8042aca6dc97c42
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 102400
Filename: batmand_1440-r1_riscv64_riscv64.ipk
Size: 45555
SHA256sum: 6abc9aae9cb927415f19ff37b88718b66b8897b8e11580a6893db84de7a5cde9
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 983040
Filename: bird2_2.15.1-r1_riscv64_riscv64.ipk
Size: 415359
SHA256sum: c3e2607ae8bcf742dad0168198d5d51ed1f7957eba668aa77ea0563a7ad4c323
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: bird2c_2.15.1-r1_riscv64_riscv64.ipk
Size: 11307
SHA256sum: 115219fa6d20241e8d647325ff19fde3dd0656163e229fdd2d25015f9aeb573d
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: bird2cl_2.15.1-r1_riscv64_riscv64.ipk
Size: 9793
SHA256sum: 799c760ffbc0ac37aa909adeb4a9d5a01420e7ee91670984d80ad990272c8b6a
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: bmx7-iwinfo_r2024061001-r1_riscv64_riscv64.ipk
Size: 4807
SHA256sum: 336d92438f17232eab3c2e453ff4178a25779d3772cf58266ead08978862fcec
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: bmx7-json_r2024061001-r1_riscv64_riscv64.ipk
Size: 8746
SHA256sum: a52ac7a90e785a34267d0aace3f148044ecb9e6319595d69d375011b2e810458
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: bmx7-sms_r2024061001-r1_riscv64_riscv64.ipk
Size: 6466
SHA256sum: 4c647ae33e3550f86aa3f21ae338d5c760c1f84d0c894df185299c40735b8cee
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: bmx7-table_r2024061001-r1_riscv64_riscv64.ipk
Size: 10488
SHA256sum: bb82cffce6e9dc413d556171c85a05ff9821ec4035cf22dfef1b90c5ba80af79
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: bmx7-topology_r2024061001-r1_riscv64_riscv64.ipk
Size: 5805
SHA256sum: e44ee6eca0f5ef8ddd2514a782383a54a765547d8b68f7f267781a65e5a838a1
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 71680
Filename: bmx7-tun_r2024061001-r1_riscv64_riscv64.ipk
Size: 26644
SHA256sum: a8e77426cfe0b0bc21d0ceeff80e16899e663eb68b84ce755deee2fb140f54a0
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: bmx7-uci-config_r2024061001-r1_riscv64_riscv64.ipk
Size: 9151
SHA256sum: f54eaa7ba75ffedbeb625b4af253025f415192ae6012fd3271c8cf1eb5095f7b
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 337920
Filename: bmx7_r2024061001-r1_riscv64_riscv64.ipk
Size: 172113
SHA256sum: f8670786b7224e0c9b46d69d438feeedc0f17b9f99915345664e40ee620740c2
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 1418
SHA256sum: a7b2ace4b3b1d0b0a4f37e08df3e73f898a550fceb6ceb31a91814deb856f5b1
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 948
SHA256sum: ec05a4a5f712814f302828c1d8431cea8ce45b1eac8fcef115fa080b9b3063cd
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 940
SHA256sum: ff1baa7b4e763e9671e16d75497ebe425591286330ad2933a460d6224275e5ce
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 215040
Filename: hnetd-nossl_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 106511
SHA256sum: 59b7dc5c7e487f1f89621faa8feac981501456d562b3a9618a662f23a0ff9825
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 245760
Filename: hnetd-openssl_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 117190
SHA256sum: bd500660ddd47121449f5cc4f93a918685dd0a39c540e4c72e3241460a7323c9
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_riscv64_riscv64.ipk
Size: 6584
SHA256sum: b1e2188947e5a8a324d589e3f2a6088816222ec2bffaa37540162ba157aab470
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: riscv64_riscv64
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 57609
SHA256sum: 9f259977443ce5dc4d50e5fd60a1ae3af1f7a0ea71d31b0afd7c6af10f763b0e
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25668
SHA256sum: ac2cf8ae17d3e4a890855914e0a23ebf98d275637ab9974fc9d661b0da456a3c
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_riscv64_riscv64.ipk
Size: 8197
SHA256sum: 366d8cd51535e6cb20128d63c5c65118e5f5536a563d66cef20518ea1b886fad
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2853
SHA256sum: 2f7470dd02a55b9c7079ffb7932ebf276ebb401bae1d7c7f5c61ee74046c7af5
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: riscv64_riscv64
Installed-Size: 81920
Filename: ndppd_0.2.5-r2_riscv64_riscv64.ipk
Size: 34881
SHA256sum: 1198be5d12669872709bfd7f66992a63f46080ac7f24e7e3590f9be3d0a44507
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: riscv64_riscv64
Installed-Size: 133120
Filename: nodogsplash_5.0.2-r1_riscv64_riscv64.ipk
Size: 51437
SHA256sum: ec9435c15669f86a8b80d49c5d6b3d2642fa23ae42ab2a2d2568e94d16eaca1f
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_riscv64_riscv64.ipk
Size: 13329
SHA256sum: 9d1a98b0ca083bc5adadac83f2be3b1cf3585b63a51cdad80ed28b148aab9aa9
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 2907
SHA256sum: 6e2ce09c988589f99596c6faf995e23c219acb2252a79ede84ffa3ed21b2700d
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 13919
SHA256sum: 7e8b91e7b7c91c71c5c2855ca253fc726842f7d403294680b265dedaa6d81d3e
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 4822
SHA256sum: 3a003c871c73142668f3834f9992f4ca18f9c851a77bd612abfaadaba2745b59
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 3336
SHA256sum: f2eca28b07bd36ff9462abad2f467114f55e80477f00e969449bda65b956ba8b
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 5202
SHA256sum: 39eca66fa70ee770e2145ac1ad4ce53c4eff85718214e761eca8cb27930d0c7a
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 3508
SHA256sum: 2f4132a0dd4d9a2fe6e1ad151caf226894ea19665882ff8494c9e1448ed055f8
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 81920
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 32723
SHA256sum: d69cd0f3ef69c33cc92b00385b656a442fe6c0bfd8126cde822e591c7fc766fa
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 61440
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 24230
SHA256sum: 149877c66113629034f45d54a82f8529712ce899598cc6ca74dd484bd350241d
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 10661
SHA256sum: 00ab4964f1d5ff93a711cfce41af6c8efa92d5702b0e491459cf95c50b0d6d0e
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 12692
SHA256sum: d8dd8d1807930b5e83627e2aeff3e0fc317e0227b455a98db74507d756e33aea
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 14432
SHA256sum: 5fd615a468a86992438b6fd987508d3ff280eda2d3e2ff80307d87992f79a803
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 10267
SHA256sum: d3d857163a2eabb3beb38a73caffae875862bf3d79e5c11520516bb21c5bb0cd
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 3852
SHA256sum: d85f1093b360c2fb57b793fa11169306a47efe6c34d5256057cd565ebcfb9987
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 174080
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 63219
SHA256sum: d1c3546a403b904b476804d2565b348970fda5920e687db329dd88b371e983ff
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 7621
SHA256sum: 1b278a27f26a783b2c36801844ac0e47991b08b0607578d2cc837aa065aca654
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 12655
SHA256sum: c79c92b7acc8a44295d442c8fd82f7d924871a72a02746fdfa78995fc0d3fbdc
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 5316
SHA256sum: 47aa88c4706a9854cb3e6564a29f15789249be646e4604c66bf8169b1d0362b9
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 16001
SHA256sum: 86c3254b849c0d141c22e1c09be83d550611e77baf251fd56a50d9e2f15e475b
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 2534
SHA256sum: aa0e2985e5e5a850683ea62a30ba585bf8e77fba814ff5125b555e882f0b1622
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 1951
SHA256sum: 374e28d551a7c722bc802d3a91fe801b24b113fcb02e94df0e12c9ea40616dc4
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 307200
Filename: olsrd_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 144418
SHA256sum: 6fa4ebc4c4da5c9e1b1e4c02c7244a7ec1f5ea670fb9f92a837c1ab6f2b520a2
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 389120
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_riscv64_riscv64.ipk
Size: 180747
SHA256sum: 8f0aaaf511c909a988e13bda133e176f1b3a6f20ed3e7c4d0ab6e2a1c9427d57
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 378880
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_riscv64_riscv64.ipk
Size: 176445
SHA256sum: 8c97944dc603ef9fad897a28c5563488395960ae94ffd7df88292de4233e0874
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_riscv64_riscv64.ipk
Size: 2299
SHA256sum: a9fddff4484b608e12c7babf40b05efcf56e7b4d333928c1d86bd1e5e0f6221c
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 552960
Filename: oonf-olsrd2_2022.08.25~1cec9b21_riscv64_riscv64.ipk
Size: 258536
SHA256sum: fc5e0c2d5b7c0cb31c73c1e30603b5499a38310661a35bb05676f78b3e19099e
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: riscv64_riscv64
Installed-Size: 563200
Filename: opennds_10.3.0-r1_riscv64_riscv64.ipk
Size: 164219
SHA256sum: f66df7823ba780aa40e895917336cb35d52b80a74cd59d406bfabc9a8d9a28b4
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: riscv64_riscv64
Installed-Size: 204800
Filename: pimbd_2018.06.19~dbf4e591-r4_riscv64_riscv64.ipk
Size: 88777
SHA256sum: 8aeb25eeb63a7e0cfd6be1f28db2f6c8e0546b0c1b3dbaf9c627b510c4d9cc99
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: riscv64_riscv64
Installed-Size: 92160
Filename: prince_0.4-r3_riscv64_riscv64.ipk
Size: 31699
SHA256sum: 6ad4ffd9feb3d889749c555ba50ea8db5082c1c654fe284a7a0da75e878b054d
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: vis_2013.04.07~7710cce4-r9_riscv64_riscv64.ipk
Size: 12392
SHA256sum: a49435e0fcf9fb6ba688c5f698949cc5e34e904d45f8e7a1b3f1c2373a6effd2
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_riscv64_riscv64.ipk
Size: 11094
SHA256sum: 2e943a88228ed23f65036681ff5ab33224b85b118e07509705b49a8e07cd16c9
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.