Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: ahcpd_0.53-r3_aarch64_cortex-a76.ipk
Size: 24198
SHA256sum: 82acbdec01191fca18e3348d8e220e1173d4278752784d1e9690c5590d5f8fb3
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: aarch64_cortex-a76
Installed-Size: 143360
Filename: alfred_2024.3-r1_aarch64_cortex-a76.ipk
Size: 28874
SHA256sum: b8cfba2418e1d0560af316d1a19a419c2870f4b7db694a7694f43afa29be584c
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_aarch64_cortex-a76.ipk
Size: 4914
SHA256sum: 0c939cd8761a7e6f85e2646a7012dc3e8d574ef208c116c47a3232cc3fdd23a7
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20231128, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: aarch64_cortex-a76
Installed-Size: 153600
Filename: babeld_1.13.1-r2_aarch64_cortex-a76.ipk
Size: 69287
SHA256sum: e4e70a80883e80d2bd12179da7d1a140fa651a29e364e3c90744c4884d57d1ff
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: aarch64_cortex-a76
Installed-Size: 143360
Filename: batctl-default_2024.3-r1_aarch64_cortex-a76.ipk
Size: 47219
SHA256sum: a80365ffba6ea497e0ab2a28116f0551931419206b36711f392e7836eb2be2fe
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: aarch64_cortex-a76
Installed-Size: 143360
Filename: batctl-full_2024.3-r1_aarch64_cortex-a76.ipk
Size: 54247
SHA256sum: d3d386c15fee51bdcc11f0ada809fc2ff1a2c3b67b257e47846eeba97aa6deb3
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: batctl-tiny_2024.3-r1_aarch64_cortex-a76.ipk
Size: 16928
SHA256sum: f6015f2a0524c8e5a3f6e3eb4913c8540b206653add09bd30917a728e0314ff9
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: aarch64_cortex-a76
Installed-Size: 143360
Filename: batmand_1440-r1_aarch64_cortex-a76.ipk
Size: 45841
SHA256sum: f5d0e503404930307c77ba57affc84d617782d94686b871565f7f7b86bb26bd8
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: aarch64_cortex-a76
Installed-Size: 1075200
Filename: bird2_2.15.1-r1_aarch64_cortex-a76.ipk
Size: 395572
SHA256sum: dbd8d2a0fbc240bd9ba263a7c8ad9493b70b66c16339039201b300449b572228
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: bird2c_2.15.1-r1_aarch64_cortex-a76.ipk
Size: 11110
SHA256sum: c981b6dc2450868ed3bcc40b25f89a2013e876cae220b4f76f4207820919d752
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: bird2cl_2.15.1-r1_aarch64_cortex-a76.ipk
Size: 9636
SHA256sum: 5e8f411ec2bded093a29b5808b9c3dc7b6febd4555c8bd26412ce9149df62559
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 5002
SHA256sum: 8149dd326a57c5c67632b38c1bd5dd0c27819e9e6428a1ead1861b3fe55df935
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: bmx7-json_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 8969
SHA256sum: 973d210c299d2c6852bc50be5562596f6cb360f01750fd115e1925f79973e024
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: bmx7-sms_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 6561
SHA256sum: ca0958bdb71daed66f9613a3c98135bfc732245e192ddf5794185718bcc38d3b
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: bmx7-table_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 10978
SHA256sum: 161ecf6cb10ef9aa2b7fb9e773f6c9ce8b7f1a1623d14734371aff34c74e4f3b
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: bmx7-topology_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 6009
SHA256sum: 4b74273d3f117562d3c22e9043ebe8f9041477b1a2656247fe5285ac9bb68cf0
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: bmx7-tun_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 27635
SHA256sum: d12a5bf893b18baa61ae12e78f634c1b032a865de1e9d5faaa9f9d720b01d586
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: bmx7-uci-config_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 9606
SHA256sum: e30020bc94a59f6777206c4f5732230f1639c5f165161b5d7768fbf63ece38b2
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 430080
Filename: bmx7_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 178520
SHA256sum: 68bc4d32778b59a3804ac24f399ac8c9dc7db09a0b60451f08f43271687d35ea
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: aarch64_cortex-a76
Installed-Size: 768000
Filename: cjdns-tests_21.1-r6_aarch64_cortex-a76.ipk
Size: 342508
SHA256sum: 851e5a8c10b0ef8729a2036b7be5ae5261726df832aa286b05a40a1df1db9082
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: aarch64_cortex-a76
Installed-Size: 993280
Filename: cjdns_21.1-r6_aarch64_cortex-a76.ipk
Size: 404303
SHA256sum: 98f6e870f359689305134328bd415d21999867d4242f0b91398029065cc24497
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: aarch64_cortex-a76
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk
Size: 1426
SHA256sum: 497acd1d28e2aadab1765fb924eab47dc8706e5b59d70ea9157c0a82f45b8bc2
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: aarch64_cortex-a76
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk
Size: 955
SHA256sum: 13969426abb7cf27719d2b34d2b3412eb4e384ae22c2c435e211bdb9af07ca1e
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: aarch64_cortex-a76
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk
Size: 947
SHA256sum: 509a150e84708d69916effb082f1c5c08a505dd22ad62fa3ffdba22123310dcc
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: aarch64_cortex-a76
Installed-Size: 296960
Filename: hnetd-nossl_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk
Size: 104007
SHA256sum: 2c4356743a57d11bf8b6927dca101f45dc4e566b9b6ecfdcd35722848d276564
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: aarch64_cortex-a76
Installed-Size: 296960
Filename: hnetd-openssl_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk
Size: 114855
SHA256sum: 4333025b859b30dcdec34744c008d415305139219ac69e7600a2dc5ce392fdb0
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: aarch64_cortex-a76
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_aarch64_cortex-a76.ipk
Size: 6585
SHA256sum: 44868357d0a657076eb44cea93da6ad3c80538b5c2dfae9c2d6973337765208c
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: aarch64_cortex-a76
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk
Size: 57618
SHA256sum: fe8fd2224d5412da01767bee7a6eeae40145773e39ab1456016ebad4ad5b5be8
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25668
SHA256sum: ac2cf8ae17d3e4a890855914e0a23ebf98d275637ab9974fc9d661b0da456a3c
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_aarch64_cortex-a76.ipk
Size: 7926
SHA256sum: 2b07ff480e1ff3b5f84e0a555f46189e82aca5a2fc6da87482bea5b63ab9892c
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2853
SHA256sum: 2f7470dd02a55b9c7079ffb7932ebf276ebb401bae1d7c7f5c61ee74046c7af5
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: aarch64_cortex-a76
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_aarch64_cortex-a76.ipk
Size: 33796
SHA256sum: 9a262cb1b64fa8ced216db957b1f14acfbca8d80350cddbd1b29ebf107f51542
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: aarch64_cortex-a76
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_aarch64_cortex-a76.ipk
Size: 50609
SHA256sum: c400e2cde5698a2bff49a9d025b70cf6b41e3ea60685340890bae3ab25909ae6
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_aarch64_cortex-a76.ipk
Size: 12318
SHA256sum: 55ac5b37b161e336f74a94460615091c9f02cfb7896edcb8b1cd55edc7f76d6c
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 2942
SHA256sum: fd3518c5e656642e8ee56d76d05192a9f992fe51066afffac1b90e2a45c8147b
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 14301
SHA256sum: 02f73b91fefb58e92ce9b954505523ddd9434b39f681780629b68e05f85cd8e1
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 4889
SHA256sum: b1146bbc79b58c9ee3ad508932c54b8d98d9f96e46845e7e4f6d2e590931e57f
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 3378
SHA256sum: 2426ca9d962e6f05d04a887e5e3897f3ff83b6de69f9e216e926ad1ee82f5b55
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 5285
SHA256sum: 94600de7856ffb955da0849b888205752b87b93a76da27f6f56f286a1ce0431b
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 3654
SHA256sum: 18f2d308b41e79612456b2218c8f76e198caca85b5010fabceeb13646946dc91
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 31778
SHA256sum: bd657c1d402c088565c70466b79b9d99e9c48409bcdc1882be0eab3b77c3c6a9
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 24204
SHA256sum: 30ee877d8ab2156de5d99518df8dd1c090b3a205ec7df2e6a68dd1ca596c3b17
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 10916
SHA256sum: f282676bea5f400d0cca082b19f3b1bacb272be27aa2f41b8439a588c6dd922c
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 13312
SHA256sum: 854227a9d4944a0c0cae919124548585dcef775b5f1af88ad3804be8532738cb
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 14988
SHA256sum: fcdf700c96fdbde8ec73a518f11b3bcc58628789a3c12158dc6060e34129cf61
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 10571
SHA256sum: 2225808c5d22145efe4585817c5f82d1691ac71a24cf7aded3f836f8ec7e37ff
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 3924
SHA256sum: 48af82637913a829e5a0871531eeb1f3a52e521d8b2fb1785a7d4876eb056cdf
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 337920
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 63351
SHA256sum: 51c7b3a193491d6b3ce8a013428d15220562b1d093de702c6eb3358fe70ef561
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 7791
SHA256sum: 1910ade890411d53c4a77ca7ec1e84c74eca02c88a2bd254880a0a2a76d041ab
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 11789
SHA256sum: 14c71048b5eb0bc304287ad29b76c9d7201163bf827295b8ee7d3720f372d699
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 5778
SHA256sum: 37a0dca64e04e0d3c4b368d8caf534b77b72c1bea908f4d76698b99f323bb91d
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 16505
SHA256sum: 458d3e0f4972ffd894783f85c789d82c7573cf62eaf5c30a45546d2c58170028
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 2571
SHA256sum: 33535560103911cb13230e653893f673a93423a294b4c09760cd97510c15dff9
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 1954
SHA256sum: 2b430bf1d6ef8afddb94ce1571c9342e7215b0d8d4c6e897468b26e518fb2e50
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 368640
Filename: olsrd_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 146177
SHA256sum: 8cd50d16974d2ec8f58cec74f5a17b6b1b864fa975ae87e552b0c39c7d97a495
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 440320
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_aarch64_cortex-a76.ipk
Size: 182574
SHA256sum: 4adf9a220230991dfd872d821ca43e5fa87984fb270e22a30a9827fe4036e7fe
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 440320
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_aarch64_cortex-a76.ipk
Size: 177883
SHA256sum: 610d5d66fd9d590f6cbbd59043494f40130b4c75c866a0974f4c3a21d56f9d76
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_aarch64_cortex-a76.ipk
Size: 2305
SHA256sum: b10604317efc72fa7ba3db174ca3210741fbcbde9bd24cacd6727443043de7fd
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 655360
Filename: oonf-olsrd2_2022.08.25~1cec9b21_aarch64_cortex-a76.ipk
Size: 261614
SHA256sum: 0a3ff86d914cb9c3d244aa559aea976ee73fa57aa5f7fecb62bba0e7792275e0
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: aarch64_cortex-a76
Installed-Size: 634880
Filename: opennds_10.3.0-r1_aarch64_cortex-a76.ipk
Size: 164384
SHA256sum: b6de3eaa3be9db465cce9f1ca83b5a891da32440136a95fe1f07bd47370c0346
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: aarch64_cortex-a76
Installed-Size: 225280
Filename: pimbd_2018.06.19~dbf4e591-r4_aarch64_cortex-a76.ipk
Size: 88268
SHA256sum: 0d0bddbef9ac50f64dc3d7d152f7fc8008084c72167cbbf420d0a1e577e1c3e7
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: aarch64_cortex-a76
Installed-Size: 215040
Filename: prince_0.4-r3_aarch64_cortex-a76.ipk
Size: 37929
SHA256sum: 06187438ab356d02424a9f6a9a1ad0120e6b19b221bd9787cffdb43e5d9febcb
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_aarch64_cortex-a76.ipk
Size: 12080
SHA256sum: fc5ac791c156a0c903d5063075eed3f56afaeaf56bb7144d9bcc9c268216f4c4
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_aarch64_cortex-a76.ipk
Size: 10045
SHA256sum: ce4951419daf8825f75e0802053791ec8d4562b3ffea6e0901934ce8b92714c6
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.