Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: mips_mips32
Installed-Size: 81920
Filename: ahcpd_0.53-r3_mips_mips32.ipk
Size: 23376
SHA256sum: 8ea0d544797108ba22a5e29ae5ae6e4794ef0d1579c55ecb755ca0ba3bbcf180
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: alfred_2024.3-r1_mips_mips32.ipk
Size: 27671
SHA256sum: 221a9ac163f2a24e446a6411be9983cba2920c69e37299f0d6cd35a8a5a68413
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: mips_mips32
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_mips_mips32.ipk
Size: 4646
SHA256sum: 3a7a2aa8929505963726ff0f9b236bed0e60818197b2f864563a5be92dd94d66
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: mips_mips32
Installed-Size: 153600
Filename: babeld_1.13.1-r2_mips_mips32.ipk
Size: 63810
SHA256sum: 5097d3b30a1af31cc2407436f2f9b579bb42e2fb2ce4fe26493745e151861a88
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: batctl-default_2024.3-r1_mips_mips32.ipk
Size: 42474
SHA256sum: 1be1bf6d25a62d25e79ab0e6f5567c1ca76f77e300210712229f85d94514a672
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: batctl-full_2024.3-r1_mips_mips32.ipk
Size: 50025
SHA256sum: 2c09b80eed06e4a5c36522bddb89ad3f6005ca34b24961cc6d4ca3ab5f16e283
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: batctl-tiny_2024.3-r1_mips_mips32.ipk
Size: 14497
SHA256sum: 614dd42027a162677e3099f620dd20f49120fecbdc268d18d50506a9c2edf17c
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: batmand_1440-r1_mips_mips32.ipk
Size: 39878
SHA256sum: 11f62cc838395407fe37f93d9c0a4b7dcc13f86e8cef1e7789b9c4c00eb0ce13
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips_mips32
Installed-Size: 1075200
Filename: bird2_2.15.1-r1_mips_mips32.ipk
Size: 397473
SHA256sum: b5189637b0847b41a35026424a9d794f27b73732646db10d769df7eb86c7e754
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips_mips32
Installed-Size: 71680
Filename: bird2c_2.15.1-r1_mips_mips32.ipk
Size: 10546
SHA256sum: c79a74c6788ec9baf7f84db639865e49cc7f15c0a3cd1021dd61c972c61ccb33
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips_mips32
Installed-Size: 71680
Filename: bird2cl_2.15.1-r1_mips_mips32.ipk
Size: 9221
SHA256sum: 9dc63b7595b6d389824a86bd56d3e03fba46442114ae94d9443827ab14ec1b3c
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024061001-r1_mips_mips32.ipk
Size: 4686
SHA256sum: 94b66b9f87bee3d290de9e2d9be209b166d2dec439ccae041a33cfd3ad53664b
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-json_r2024061001-r1_mips_mips32.ipk
Size: 8639
SHA256sum: 3bf9fc5022b1c1e5854b1b5733311ce76801314dd163a06760c8d1c0c17a6434
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-sms_r2024061001-r1_mips_mips32.ipk
Size: 6139
SHA256sum: f418bee14365ed9300dd4ce958f4cd7ff6a77485a9c5bc1bc6e5b680a964970b
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-table_r2024061001-r1_mips_mips32.ipk
Size: 10139
SHA256sum: 3db6232a680579143642fde17220281f2721e04d05e63f15f5c2b949f4aecc9c
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-topology_r2024061001-r1_mips_mips32.ipk
Size: 5667
SHA256sum: f38e705a4b00ecac38ddbefa2f2d8c6854fa528c5041a8f05f76ee08d316e408
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 81920
Filename: bmx7-tun_r2024061001-r1_mips_mips32.ipk
Size: 25880
SHA256sum: c28426ee16425e2cb00855ec138965d47552f46e468576737719a9d0ef128126
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 81920
Filename: bmx7-uci-config_r2024061001-r1_mips_mips32.ipk
Size: 8824
SHA256sum: a9434097de545e0cc4f683c86c00b53265f1676f4a042c6e6934ebed180ca9d4
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 419840
Filename: bmx7_r2024061001-r1_mips_mips32.ipk
Size: 176529
SHA256sum: 867f4fffbe59609d2bfb643969c4dc76463a545232ec0b0fd921dac5bf1b6544
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mips_mips32
Installed-Size: 901120
Filename: cjdns-tests_21.1-r6_mips_mips32.ipk
Size: 376553
SHA256sum: e1dec47c4de43f8337629056e1872864717fb7f30394bf81efcd38a9b6f8a521
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mips_mips32
Installed-Size: 1064960
Filename: cjdns_21.1-r6_mips_mips32.ipk
Size: 454866
SHA256sum: 3f90c5f7c4e3c0074fec5542ac102a3fd1381c93f8feab6a23f56abbe8b7ba77
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 1420
SHA256sum: ad53008ad2395add73f5fe81571e6269e5517bf9511148d66c17cc35443f7423
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 952
SHA256sum: 6b42e3c2065a9d94157933c5663462426484d5fd2fdec51f11b687e621d4b664
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 942
SHA256sum: 3b8a6782f605e9c2db41b2fb34d1c04b529a6b48bd7aaae7abcbb7d66845470b
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 235520
Filename: hnetd-nossl_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 95726
SHA256sum: b4aa91947e4535cd04f1b5774a43de56e3c615ab06f8eb9e71a042749f1fe004
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 296960
Filename: hnetd-openssl_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 106035
SHA256sum: c36c929a64695f8e31afba61960dffa4831aa29c2ce1241d283e4fcaf81c3c83
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: mips_mips32
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_mips_mips32.ipk
Size: 6581
SHA256sum: 789756c717abc5e32bf8b408d2e45b9d914cd333fbcaa8c77e1629cdb8e47fc5
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mips_mips32
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 57617
SHA256sum: 486341402269b28be976ff712157535762f5026b6f866dc4123a57f732a1b971
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7779
SHA256sum: 596767fec4e045b69d9d404a48564028110f0c54316a25143bd12fab05998091
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25669
SHA256sum: 15f78044bf83c22a9b21793f7ea6d6746fd84135860fbfbad583f220b1f4aa4f
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: mips_mips32
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mips_mips32.ipk
Size: 7566
SHA256sum: 14dd84dc43ef3e551c520d4d04e4ff59fd9001097037f33d65f534969eed8099
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2851
SHA256sum: a9a07dc66cb1afb09c2eae025ad20f1f3bee4ce83e3a2c0b9ee4bb9332cf6c56
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: mips_mips32
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_mips_mips32.ipk
Size: 32028
SHA256sum: f91ad46aa10f86d3b5c6d69cae45e460e05e30063f52253eddd706d87a5b2b81
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: mips_mips32
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_mips_mips32.ipk
Size: 46129
SHA256sum: 28f40385a4015ecf759cdc239928996c72d42fa08ab077d117d6af6a96cdfa1b
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips_mips32
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mips_mips32.ipk
Size: 11819
SHA256sum: 428c60451b6a02f4baa3d535fcf4bcfdac8ffa44f45e934fcf66224138717120
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 2708
SHA256sum: 5ebf8e7c5a3e94fdbfdd1617e76e6280d23228fbff85b73d29e894fdb9338a63
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 12790
SHA256sum: 59c202f9e7fcb22011412103f381667d5fe0c202a499162bbdbd39c7994f1949
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 4438
SHA256sum: 3536cefa43bf9f2ec3b29aecc780b19e0686ac2d8c3cd2ce00133b46bc5eb7f1
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 3056
SHA256sum: 059cc1fcfdabc182148c7bb27bd3c1b64525e0c83bdfbd519dea22a317e8fab2
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 4835
SHA256sum: 069cd10b9ab192af16d22680c5e2aa9a900d84f35b4a9a76cc65d58a35f7b7a9
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 3228
SHA256sum: 79bf6daf0fc07718ba84731cf64ab47d2bccc9aaab14e17cb14175cce2a9fa5b
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 31775
SHA256sum: 80b402cce8d79f8dd77e79cee1367017dc405d226448ad4ce040e35b644ffc89
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 23720
SHA256sum: 9a6e4fd56edfd53ac9057cbd6faed0cefc1ec498e115ecd7e95820e06424fb67
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 9494
SHA256sum: c2aa0ffbdbe66bc4268106963402625be0e412df5c856ec7f02f9b49495fc6cb
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 11988
SHA256sum: e64cbc1e7baae6144ccea3f9cdc82f0db8ef4a40cd6463a00f0f0b8041b73f2d
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 13793
SHA256sum: 6e68231a7c455adc0c931da3d6912f4ed978da28f1562f876fc3e7d1cef77737
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 9211
SHA256sum: 7a4c287cc4f92a234dd8ee8ad3767138d0a9615e7bafb3db4c28317442fb0440
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 3595
SHA256sum: 2b2728ee6213e345f9e63d8154fff047651716c1d864d8ae8b1cb7809f79e50c
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 256000
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 63024
SHA256sum: de9c5fb47f9d70948b8f31dcef9d15d58e85f9d01864cbad00be7e824a3fe0b3
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 6968
SHA256sum: 54235a435e3997ebe3cdacd65a5255a4435791f80bd12130430fa6cc1b2feebd
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 11004
SHA256sum: c027b41272d0a998e908ee0e2b4e8e8d0d71549fed4ccda9560c1ba18183d286
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 5174
SHA256sum: e104b86983927089bb3201e9452308b9cffda23fa7d65211db610eab9cb0123f
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 15558
SHA256sum: 156a7aca10f0baa3339568a59d5ea6f285e781d15e25d06551f7b88122c68a99
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 81920
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 2393
SHA256sum: faf860bcc91417c784e0408ea8c2ee2e800e283433f6d3e43b50d7a037033682
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 1953
SHA256sum: 4d2345a2017d3064805f3667f49951e8e3e395cc85cec283218b04c8a162c9c8
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 368640
Filename: olsrd_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 139326
SHA256sum: 67deca8f0f13f097c6aa8244520b24354a55881dab01d2d1cee28666ed7b9cf9
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 430080
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mips_mips32.ipk
Size: 159699
SHA256sum: 8e53a095ef08feaed66f3d76ce713823a711ddd1362694cad4eda2afd42dcc2b
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 430080
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mips_mips32.ipk
Size: 156103
SHA256sum: 90df8cfd4935196ab423b375565a01bd513b595792d81405ab18dfa479ed50cb
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_mips_mips32.ipk
Size: 2300
SHA256sum: b73fbb5f9b0a410fc23750bc8bf837554927ae70b3195a7248b756da8bab8701
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 634880
Filename: oonf-olsrd2_2022.08.25~1cec9b21_mips_mips32.ipk
Size: 232637
SHA256sum: 4a58718d39ebb506140ac3df2b8b5cbb6126ed44acff514c0784c0416ab25a78
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: mips_mips32
Installed-Size: 634880
Filename: opennds_10.3.0-r1_mips_mips32.ipk
Size: 159422
SHA256sum: 514dd6e083c229f9fc1b92c402837de469f1abd384d201795418cff9f71c75cb
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: mips_mips32
Installed-Size: 225280
Filename: pimbd_2018.06.19~dbf4e591-r4_mips_mips32.ipk
Size: 79168
SHA256sum: 5b2e087c830315ab988f4ea14272bf248e916a98fb70710f92868b612fd5f3f5
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: mips_mips32
Installed-Size: 215040
Filename: prince_0.4-r3_mips_mips32.ipk
Size: 33821
SHA256sum: c639deafd707a20653ab16aa40786b2f7fa6ef5d338f0e39561544a7a7f0169c
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_mips_mips32.ipk
Size: 11142
SHA256sum: 6270a9a7ff463d4bd5404a776f21b28115f5ff7559f53128c04c658694bbe61c
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips_mips32
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mips_mips32.ipk
Size: 9481
SHA256sum: 2487808b5249fa575056d16873e3cdd590284c1f8b1b983b4e38ca4994d8a263
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.