Package: ahcpd Version: 0.53-r3 Depends: libc, ip, librt License: MIT Section: net URL: https://www.irif.fr/~jch/software/ahcp/ Architecture: mips_4kec Installed-Size: 81920 Filename: ahcpd_0.53-r3_mips_4kec.ipk Size: 20169 SHA256sum: 91ed1794c530573c0708864b6669cc4d0cde67faef09e3ab19c627332e91f656 Description: Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. Package: alfred Version: 2024.3-r1 Depends: libc, libnl-tiny1, librt License: GPL-2.0-only MIT Section: net URL: https://www.open-mesh.org/ Architecture: mips_4kec Installed-Size: 143360 Filename: alfred_2024.3-r1_mips_4kec.ipk Size: 24712 SHA256sum: c525b08d72bab7156d4bed8e37100e6d1685172f90e300bbb3f176a09bc01171 Description: alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ... alfred runs as daemon in the background of the system. A user may insert information by using the alfred binary on the command line, or use special programs to communicate with alfred (done via unix sockets). alfred then takes care of distributing the local information to other alfred servers on other nodes. This is done via IPv6 link-local multicast, and does not require any configuration. A user can request data from alfred, and will receive the information available from all alfred servers in the network. Package: babel-pinger Version: 0.1-r1 Depends: libc, librt Section: net URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/ Architecture: mips_4kec Installed-Size: 71680 Filename: babel-pinger_0.1-r1_mips_4kec.ipk Size: 4247 SHA256sum: 9478b20f6e7b41857f5a90503bc467d5b70705ed87069d98dd1da4e3c2a74499 Description: Babel-pinger is a hack to export a default route into Babel for people using DHCP to configure their routers rather than speaking to their upstream provider with a proper routing protocol. Package: babeld Version: 1.13.1-r2 Depends: libc, libubus20241020, libubox20240329 License: MIT Section: net URL: https://www.irif.fr/~jch/software/babel/ Architecture: mips_4kec Installed-Size: 153600 Filename: babeld_1.13.1-r2_mips_4kec.ipk Size: 55135 SHA256sum: 76441c61b7c03cc0aee3093a245b8cb322dd445cbe50aa50203781acc04dd0da Description: Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is an IETF standard protocol (RFC 8966). Package: batctl-default Version: 2024.3-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: mips_4kec Installed-Size: 143360 Filename: batctl-default_2024.3-r1_mips_4kec.ipk Size: 38249 SHA256sum: 71d8c26094dfae1a07a161461ef168e5b20f5fa891dec56b38ea683513f474ca Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.3 of the user space utility. Standard subcommands for configuration and online debugging are enabled. Package: batctl-full Version: 2024.3-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: mips_4kec Installed-Size: 143360 Filename: batctl-full_2024.3-r1_mips_4kec.ipk Size: 44594 SHA256sum: 66d89994159a6f917ad315289c29f64fa31c987ddaef4f6d4a7c93145cd30c69 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.3 of the user space utility. Subcommands for configuration, online and offline debugging are enabled. Package: batctl-tiny Version: 2024.3-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: batctl-tiny_2024.3-r1_mips_4kec.ipk Size: 12891 SHA256sum: f1e885f9bab9945a23a217616b4718ea6ad461c0da39ad711d3a48e9d798702a Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.3 of the user space utility. Only configuration relevant subcommands are enabled. Package: batmand Version: 1440-r1 Depends: libc, libpthread, kmod-tun License: GPL-2.0 Section: net URL: https://www.open-mesh.org/ Architecture: mips_4kec Installed-Size: 143360 Filename: batmand_1440-r1_mips_4kec.ipk Size: 35952 SHA256sum: 4dc68f10ea5166298ab59f88b31a99aa44f6ab43cc94416e0d8dc0515105909b Description: B.A.T.M.A.N. layer 3 routing daemon Package: bird2 Version: 2.15.1-r1 Depends: libc, libpthread Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: mips_4kec Installed-Size: 870400 Filename: bird2_2.15.1-r1_mips_4kec.ipk Size: 353444 SHA256sum: d26405dea0e5070ce37bb572f452b388d9d0266dd1434b5ba0f6d555ead83099 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and OSPFv3, RIPng, Babel and BGP protocols for IPv6. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6 into a single branch, and also adds support for the Babel routing protocol. Package: bird2c Version: 2.15.1-r1 Depends: libc, bird2, libreadline8, libncurses6 Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: mips_4kec Installed-Size: 71680 Filename: bird2c_2.15.1-r1_mips_4kec.ipk Size: 9790 SHA256sum: 8a1e0dba922190448403ab9eb85027d261d7503d1ea2770dca558463767a8ccc Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. Package: bird2cl Version: 2.15.1-r1 Depends: libc, bird2 Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: mips_4kec Installed-Size: 71680 Filename: bird2cl_2.15.1-r1_mips_4kec.ipk Size: 8580 SHA256sum: 03434fe44b14d78144c686fbd4db9aa613732e4a11398ec557b4bd6b9aa301dd Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Package: bmx7-iwinfo Version: r2024061001-r1 Depends: libc, bmx7, libiwinfo20230701 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 71680 Filename: bmx7-iwinfo_r2024061001-r1_mips_4kec.ipk Size: 4634 SHA256sum: 73b33f492fa56b53bd998112c8a9c7af7a6cd33a5658e73f5e54caeb0414d481 Description: link characteristics plugin via libiwinfo (recommended!) Package: bmx7-json Version: r2024061001-r1 Depends: libc, bmx7, libjson-c5 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 71680 Filename: bmx7-json_r2024061001-r1_mips_4kec.ipk Size: 8081 SHA256sum: d18eaa13a1f14688269ab56d1e9f060d9d8269b9e80504f04f12fd62ee85b669 Description: json plugin based on json-c Package: bmx7-sms Version: r2024061001-r1 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 71680 Filename: bmx7-sms_r2024061001-r1_mips_4kec.ipk Size: 5919 SHA256sum: a43005746a9950466f5c3d60759bd3b3705db54668f6db3b2157bfa072aa55eb Description: sms plugin Package: bmx7-table Version: r2024061001-r1 Depends: libc, bmx7, bmx7-tun License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 71680 Filename: bmx7-table_r2024061001-r1_mips_4kec.ipk Size: 9553 SHA256sum: c157f32cc97f0beff34a5ffb4e07e5d8b76152a3b5dcd1f3f0f8c6be5167d43d Description: plugin to announce routes from tables via tunnels Package: bmx7-topology Version: r2024061001-r1 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 71680 Filename: bmx7-topology_r2024061001-r1_mips_4kec.ipk Size: 5629 SHA256sum: 993787288ea0b36e3c0e0efecffdb3046e6f3e51791603f95f94e6fc8e8b5d24 Description: topology plugin Package: bmx7-tun Version: r2024061001-r1 Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 81920 Filename: bmx7-tun_r2024061001-r1_mips_4kec.ipk Size: 24678 SHA256sum: d0c4287acc6dd364107139b0d19e421659e217ab1afadaa1e7313ecd867af15d Description: ipip-based tunnel plugin (recommended!) Package: bmx7-uci-config Version: r2024061001-r1 Depends: libc, bmx7, libuci20130104 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 81920 Filename: bmx7-uci-config_r2024061001-r1_mips_4kec.ipk Size: 8350 SHA256sum: 49c48e34c220a32b5cdaecb64504ab9f5441be67d50bf6c1ff34aaf48c4fcf84 Description: configuration plugin based on uci (recommended!) Package: bmx7 Version: r2024061001-r1 Depends: libc, zlib, libmbedtls21, libiwinfo20230701 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 358400 Filename: bmx7_r2024061001-r1_mips_4kec.ipk Size: 156483 SHA256sum: 672148c8c2a69de4da0195d0faf2ef0f28a48f0158c62e91225994d103bb5880 Description: BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing Package: cjdns-tests Version: 21.1-r6 Depends: libc, libpthread, librt License: GPL-3.0-or-later Section: net URL: https://github.com/cjdelisle/cjdns Architecture: mips_4kec Installed-Size: 696320 Filename: cjdns-tests_21.1-r6_mips_4kec.ipk Size: 333316 SHA256sum: d0a00968164bfaee9726b085077e5f6c7030fc8d866fafdf50ba7cfeff1c602a Description: cjdns test cases Package: cjdns Version: 21.1-r6 Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2 License: GPL-3.0-or-later Section: net URL: https://github.com/cjdelisle/cjdns Architecture: mips_4kec Installed-Size: 931840 Filename: cjdns_21.1-r6_mips_4kec.ipk Size: 400473 SHA256sum: 59f09fb19f3af742732bcb5b717447a41180fafdb1f9bb58f23d2af66b07e677 Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: hnet-full-l2tp Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: mips_4kec Installed-Size: 10240 Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mips_4kec.ipk Size: 1415 SHA256sum: 284cda08145e7657e3bc08ccf4a69ad2048ae67e60a40cbd5b84c96859153786 Description: HNCP Homenet metapackage (w/ L2TP) Package: hnet-full-secure Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: mips_4kec Installed-Size: 10240 Filename: hnet-full-secure_2018.12.21~c4376661-r1_mips_4kec.ipk Size: 953 SHA256sum: 9e058facb45e3690ac671b3047336d944e5ab19cbd7d5990b113e44432e4b3f7 Description: HNCP Homenet metapackage (w/ SSL) Package: hnet-full Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: mips_4kec Installed-Size: 10240 Filename: hnet-full_2018.12.21~c4376661-r1_mips_4kec.ipk Size: 943 SHA256sum: de9f44c9725f9ba9801421a17fb61561da74e7a1aada62c23215cc4a66833806 Description: HNCP Homenet metapackage Package: hnetd-nossl Version: 2018.12.21~c4376661-r1 Depends: libc, odhcpd, odhcp6c, netifd License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: mips_4kec Installed-Size: 163840 Filename: hnetd-nossl_2018.12.21~c4376661-r1_mips_4kec.ipk Size: 83666 SHA256sum: 6e23d0ecb141be4cd5bb14dab934708ac176062a6e25e1b9574a7af6bc496c8a Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: hnetd-openssl Version: 2018.12.21~c4376661-r1 Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3 License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: mips_4kec Installed-Size: 235520 Filename: hnetd-openssl_2018.12.21~c4376661-r1_mips_4kec.ipk Size: 92217 SHA256sum: 55ef89a629acba53d8dd108a1681b2fb3ecdaf061c62488687f54764270dd4b2 Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: luci-app-cjdns Version: 1.3-r9 Depends: libc, cjdns, luci-compat, luci-base License: GPL-3.0-or-later Section: luci URL: https://github.com/cjdelisle/cjdns Architecture: mips_4kec Installed-Size: 40960 Filename: luci-app-cjdns_1.3-r9_mips_4kec.ipk Size: 6579 SHA256sum: f06ea134bd469b703100d2916e32440bda9cf293ff078729f9f1f6c78f65ebcf Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: luci-app-hnet Version: 2018.12.21~c4376661-r1 Depends: libc License: GPL-2.0-only Section: luci Architecture: mips_4kec Installed-Size: 235520 Filename: luci-app-hnet_2018.12.21~c4376661-r1_mips_4kec.ipk Size: 57618 SHA256sum: 402b967f451bcc1675dc103ce41aadb1a9f020f3c9a2914232ea1a0d89afd57a Description: HNCP Homenet configuration and visualization Package: luci-app-olsrd2 Version: 0.2.6-r16 Depends: oonf-olsrd2, luci-mod-admin-full, libc Section: luci Architecture: all Installed-Size: 61440 Filename: luci-app-olsrd2_0.2.6-r16_all.ipk Size: 7779 SHA256sum: 596767fec4e045b69d9d404a48564028110f0c54316a25143bd12fab05998091 Description: OLSR2 configuration and status module Package: mesh11sd Version: 4.1.1-r1 Depends: libc License: GPL-2.0-or-later Section: net URL: https://github.com/opennds/mesh11sd Architecture: all Installed-Size: 122880 Filename: mesh11sd_4.1.1-r1_all.ipk Size: 25669 SHA256sum: 15f78044bf83c22a9b21793f7ea6d6746fd84135860fbfbad583f220b1f4aa4f Description: Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks. It was originally designed to leverage 802.11s mesh networking at Captive Portal venues. This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes. It allows all mesh parameters supported by the wireless driver to be set in the uci config file. Settings take effect immediately without having to restart the wireless network. Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted. Default settings give rapid and reliable layer 2 mesh convergence. Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set. Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes. The mesh11sd daemon can dynamically check configured parameters and set them as required. In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled, and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul. Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier. Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates. OWE Transition Mode is enabled by default on mesh gates. This version does not require a Captive Portal to be running. Package: minimalist-pcproxy Version: 2014.12.12~2d6d1b0b-r7 Depends: libc, libubox20240329 License: BSD-3-Clause Section: net URL: https://github.com/fingon/minimalist-pcproxy Architecture: mips_4kec Installed-Size: 71680 Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mips_4kec.ipk Size: 6575 SHA256sum: b1766c117488522414dd50a22c95e471511efc61e0d2b52217c71509da1c2f00 Description: This package contains a daemon which can be used to forward PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers. In and of itself, it is not very useful, but combined with hnetd+miniupnpd it allows for control of NAT forwarding and firewall pinholes from multiple hops away. Package: naywatch Version: 1-r7 Depends: libc, owipcalc License: GPL-2.0-only Section: utils Architecture: all Installed-Size: 20480 Filename: naywatch_1-r7_all.ipk Size: 2851 SHA256sum: a9a07dc66cb1afb09c2eae025ad20f1f3bee4ce83e3a2c0b9ee4bb9332cf6c56 Description: Reboots or triggers watchdog if no link-local neighbor is available. Important: Be careful when you do a sysupgrade. Stop naywatch first, and make sure procd took control again of the watchdog. You can do this using 'ubus call system watchdog'. Status should be "running". Package: ndppd Version: 0.2.5-r2 Depends: libc, libstdcpp6 License: GPL-3.0-or-later Section: net URL: http://www.priv.nu/projects/ndppd/ Architecture: mips_4kec Installed-Size: 81920 Filename: ndppd_0.2.5-r2_mips_4kec.ipk Size: 27963 SHA256sum: c4d713b4b5b80f85db52eb2a6b495aa1c5b59e609e970acbd3b42278435cc1f1 Description: ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. Package: nodogsplash Version: 5.0.2-r1 Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra License: GPL-2.0-or-later Section: net URL: https://github.com/nodogsplash/nodogsplash Architecture: mips_4kec Installed-Size: 174080 Filename: nodogsplash_5.0.2-r1_mips_4kec.ipk Size: 43280 SHA256sum: b98e72abebadb9c21a4c2a1efaf9065add3c849dc8ea193612db34540f879e19 Description: Nodogsplash is a Captive Portal that offers a simple way to provide restricted access to the Internet by showing a splash page to the user before Internet access is granted. Package: ohybridproxy Version: 2020.05.22~0dfef1eb-r3 Depends: libc, libubox20240329, mdnsd License: GPL-2.0-only Section: net URL: https://github.com/sbyx/ohybridproxy Architecture: mips_4kec Installed-Size: 81920 Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mips_4kec.ipk Size: 10017 SHA256sum: eb4b7321fb431cbf7163813637b3b63bba9901382ca4a2d462085a8e3a2237e3 Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again. Package: olsrd-mod-arprefresh Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 2724 SHA256sum: ba204d208aec1bc0cfdb302590b237d584355e61334ea091c36b5be53e864e01 Description: Kernel ARP cache refresh plugin Package: olsrd-mod-bmf Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd, kmod-tun License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 11676 SHA256sum: 7c1cf732b04cd3024eb3ed32e4a6cf28ea9ec2a685a592785b5232690055c7b3 Description: Basic multicast forwarding plugin Package: olsrd-mod-dot-draw Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 4337 SHA256sum: 9c56a4f361918078afef1d1e11122d1a38958365721324334b5246269301e83d Description: Dot topology information plugin Package: olsrd-mod-dyn-gw-plain Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 2928 SHA256sum: bb3662866590ba430aead0f11a9b7b80cdeae4eb81575603df944001f99a1fea Description: Dynamic internet gateway plain plugin Package: olsrd-mod-dyn-gw Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 4472 SHA256sum: 6b8f52d05442f8857fe9601b346c65751ac68ec903f03290eddb5da9bbdd9a9c Description: Dynamic internet gateway plugin Package: olsrd-mod-filtergw Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 3175 SHA256sum: 8541a6912cf8bc321ff3b8e0f199b4866f5d2f5225fa512b8979d0d074192d5f Description: Filter Gateway plugin Package: olsrd-mod-httpinfo Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 143360 Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 31226 SHA256sum: ffe7f0b350e8d15d0de1068e73f9dd9d4130dc574955fd80f6d4ca850f8805af Description: Small informative web server plugin Package: olsrd-mod-jsoninfo Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 21398 SHA256sum: 6e96dae47a28665979c999e60d730b539f16320121f740f4a11abb77d69ae992 Description: Small informative plugin with JSON output Package: olsrd-mod-mdns Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 9007 SHA256sum: fd1143a44bc27c8a2ce3dadabc7a1852a4a23710980f2c1e3a197a4766fe5187 Description: MDNS/Zeroconf/Bonjour packet distribution Package: olsrd-mod-nameservice Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 10872 SHA256sum: e6488d48dd0846a2191abd949a772a3bf094bdf07b1228ffeb972ccedc86e6e6 Description: Lightweight hostname resolver plugin Package: olsrd-mod-netjson Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 12482 SHA256sum: 3cdd1edb7a63f0d2993eb7cf7d013dc8927dea1a0b3774b246afa85435ab1914 Description: netjson plugin with JSON output Package: olsrd-mod-p2pd Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 8575 SHA256sum: afaa8448cc9aa5cae6f1af6878eee445195280af57058b9f8540003827645e56 Description: Peer to Peer Discovery plugin Package: olsrd-mod-pgraph Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 3506 SHA256sum: 29d939db21ebbe5a0298c23cf23d7464819a64e9bb575bb6b27ab1df2d044226 Description: output network topology for pgraph Package: olsrd-mod-pud Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd, libgps30 License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 153600 Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 59409 SHA256sum: ba2e404c7a44c890e93633539104f1ba6992c818c547eee11aad67456821af55 Description: Position Update Distribution plugin Package: olsrd-mod-quagga Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 6607 SHA256sum: a1e25bdad58038bb65a24d768d817aa4943fdbdcd0353e7873bc858428f6b1e2 Description: Quagga plugin Package: olsrd-mod-secure Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 10608 SHA256sum: 2c23b6d75891f20f559321c8edd84e5d3418d191c109e88848061d78d2e13df1 Description: Message signing plugin to secure routing domain Package: olsrd-mod-sgwdynspeed Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 4983 SHA256sum: ea9042a5bd8048b54b8890bd203a4a4b4533451b1977d644627ba92c98d5c94b Description: Smart Gateway dynamic speed plugin Package: olsrd-mod-txtinfo Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 13760 SHA256sum: 1b12955f33aff3f55b6c0b5518b2f843e23aa3596da4ade6b11ab5d640aa43ab Description: Small informative web server plugin Package: olsrd-mod-watchdog Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 81920 Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 2431 SHA256sum: ae70b43b0ad5d4a6e76269092a5cd5dcd29ec563d983bb12ca5e5dfe6ab8aa37 Description: Watchdog plugin Package: olsrd-utils Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 10240 Filename: olsrd-utils_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 1953 SHA256sum: 3a24b9278f6cf8b4f3a8b93c1f3a5203d16bac508f74ad4117419b603dcf3a29 Description: Utils for OLSRD Package: olsrd Version: 2024.06.09~d72be9ad-r1 Depends: libc, libpthread, libubus20241020, iptables, ip6tables License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 307200 Filename: olsrd_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 127112 SHA256sum: ad6154fe46c34200a8fb65b05f13b421a9035d2c90d28b5d6b48fb3a21631aee Description: OLSR (Optimized Link State Routing) daemon Package: oonf-dlep-proxy Version: 2022.08.25~fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 296960 Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mips_4kec.ipk Size: 136618 SHA256sum: 0110f253f315323a03b1c2c505ccec9f49be6642da010fe07b70d8fd3448756d Description: Build DLEP Radio+Router Agent Package: oonf-dlep-radio Version: 2022.08.25~fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 296960 Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mips_4kec.ipk Size: 133347 SHA256sum: bfbf6132546745f41c8108f648437dbcc8c349113d55fcab16809374b4010c09 Description: Build DLEP Radio Agent Package: oonf-init-scripts Version: 0.9.1-r3 Depends: libc Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 10240 Filename: oonf-init-scripts_0.9.1-r3_mips_4kec.ipk Size: 2300 SHA256sum: d0543481d0b7ca834ab080297f412856b6a633265333832ccdb0679018835e29 Description: Common OONF startup scripts Package: oonf-olsrd2 Version: 2022.08.25~1cec9b21 Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 440320 Filename: oonf-olsrd2_2022.08.25~1cec9b21_mips_4kec.ipk Size: 198571 SHA256sum: d3c12ac3738a3742529c7fbcbeb04b10b7f3a1af7c1ed4ccb599447b9b8ef380 Description: Build Olsrd V2 Routing Agent Package: opennds Version: 10.3.0-r1 Depends: libc, libmicrohttpd-no-ssl Conflicts: nodogsplash License: GPL-2.0-or-later Section: net URL: https://github.com/opennds/opennds Architecture: mips_4kec Installed-Size: 634880 Filename: opennds_10.3.0-r1_mips_4kec.ipk Size: 157183 SHA256sum: 10539dc7e73d0d95cebcda4cbf549572df822358d4f226811d0283bf84baab84 Description: openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal. It provides a border control gateway between a public local area network and the Internet. It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points. Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported. This version uses nftables. Package: pimbd Version: 2018.06.19~dbf4e591-r4 Depends: libc, netifd License: Apache-2.0 Section: net URL: https://github.com/Oryon/pimbd.git Architecture: mips_4kec Installed-Size: 153600 Filename: pimbd_2018.06.19~dbf4e591-r4_mips_4kec.ipk Size: 72106 SHA256sum: 217066d0c4ceaad21d626a33b37b57e30caaaace1964604ca403519a4084e234 Description: This package provides a daemon which implements the Protocol Independent Multicast BIDIR routing protocol. Note that a routing protocol must be installed and running in order for PIM to function. Package: prince Version: 0.4-r3 Depends: libc, libjson-c5, libpthread License: MIT Section: net URL: https://github.com/AdvancedNetworkingSystems/prince Architecture: mips_4kec Installed-Size: 215040 Filename: prince_0.4-r3_mips_4kec.ipk Size: 33806 SHA256sum: f54b03430cb8d0132aec0149071fbd84b31261d49b25dd10f71d2d2dcaa1188c Description: Prince is an open source implementation of the PopRouting Algorithm. It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento. Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc), calculates the betweenness centrality using the topology and then computes the the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon. Since v0.4 it supports both OONF and OLSRd. Package: vis Version: 2013.04.07~7710cce4-r9 Depends: libc, libpthread License: GPL-2.0-only Section: net URL: https://www.open-mesh.org/ Architecture: mips_4kec Installed-Size: 81920 Filename: vis_2013.04.07~7710cce4-r9_mips_4kec.ipk Size: 9753 SHA256sum: cc115dbc9b96f0fa83b3b8a42c14c41ed18c3acafa358d63290ffef137e630de Description: visualization server for B.A.T.M.A.N. layer 3 Package: zonestitcher Version: 2020.05.22~0dfef1eb-r3 Depends: libc, libubox20240329 License: GPL-2.0-only Section: net URL: https://github.com/sbyx/ohybridproxy Architecture: mips_4kec Installed-Size: 71680 Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mips_4kec.ipk Size: 7836 SHA256sum: ec59b47d5d8d863d73f1513b398efa338ce0f5ac56fe9f75bf3920dfc617d06b Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again.