Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: ahcpd_0.53-r3_mips64_octeonplus.ipk
Size: 25642
SHA256sum: d176d8a8ddb1f19de3fca16991451ad4ebbd3a4dc9a11e747e40ddb43adb3a3c
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 153600
Filename: alfred_2024.3-r1_mips64_octeonplus.ipk
Size: 29478
SHA256sum: ef01826caf3394afac4105a513f0a9d4e9b541e8a4b5b74837630351a5bb5013
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_mips64_octeonplus.ipk
Size: 4995
SHA256sum: a801aec5fd5b025098d20a27e5257a65d2b72c0f3bbe6ea554e0975a1d40869c
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: mips64_octeonplus
Installed-Size: 225280
Filename: babeld_1.13.1-r2_mips64_octeonplus.ipk
Size: 74043
SHA256sum: 62e6b70b924999f077e5476008714b75b04781376db57fcfcdcf3bb431fbfe96
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: batctl-default_2024.3-r1_mips64_octeonplus.ipk
Size: 45651
SHA256sum: 5dd5ba4d3b6ac8ce4a270164928e0fdeefca253bb8ca4df68c91749ce1ac2565
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: batctl-full_2024.3-r1_mips64_octeonplus.ipk
Size: 52751
SHA256sum: 2739210935718ef4f9eda93f9b703f08854e084ca9398dd41f226eeb0f729b9c
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: batctl-tiny_2024.3-r1_mips64_octeonplus.ipk
Size: 15861
SHA256sum: fc17a5043e5ede9ec0df66f4d8d89c2ef05af0dd882d82ab83d3148b62fbe765
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: batmand_1440-r1_mips64_octeonplus.ipk
Size: 43918
SHA256sum: a2d196b8d52abab694360a3855cd1f2a3e92a90fa01080b1a43949b2a1624971
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips64_octeonplus
Installed-Size: 1218560
Filename: bird2_2.15.1-r1_mips64_octeonplus.ipk
Size: 412745
SHA256sum: 00ed12ca2cedffb5a6160d59516b7f66a36bd8894e82d5ada068c22202b937a2
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bird2c_2.15.1-r1_mips64_octeonplus.ipk
Size: 11062
SHA256sum: 791fdab37554854ddabdb059135bcf232783f2de1cdeac7e0688302e4424216e
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bird2cl_2.15.1-r1_mips64_octeonplus.ipk
Size: 9655
SHA256sum: b09007b5e99b8570e7fd83924054fcf88ea605fe70d6ff851a7f69631197cb5d
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024061001-r1_mips64_octeonplus.ipk
Size: 4681
SHA256sum: e2277fe7a4a8c1dc64ad76151ac132f7a561e5cfcfc9cdb2bcfe962ec5419c4c
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-json_r2024061001-r1_mips64_octeonplus.ipk
Size: 8413
SHA256sum: d0b691b0ddf0317f66440e79ca4e483d82e0a6b7607ce6df9ecabcbccbbd0a37
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-sms_r2024061001-r1_mips64_octeonplus.ipk
Size: 6220
SHA256sum: 5165f19777eb2b1e3798d6c8c3f3a5dc290ad817d4c24acac7937c5c3fb4a147
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bmx7-table_r2024061001-r1_mips64_octeonplus.ipk
Size: 10197
SHA256sum: 4cb206ace3732e42606503a18463ea573e3aa15350edf8039505c76daba67efd
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-topology_r2024061001-r1_mips64_octeonplus.ipk
Size: 5617
SHA256sum: aff2e2abccc7283a835f3923c1e0140efe264375b2d483ba2c1a1ec3dbefb78c
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bmx7-tun_r2024061001-r1_mips64_octeonplus.ipk
Size: 25680
SHA256sum: 9b253aebe660b34f0d0bfaefc03a5099ac1c882df9c56e46a62eba0437abfae6
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bmx7-uci-config_r2024061001-r1_mips64_octeonplus.ipk
Size: 8936
SHA256sum: 8b47a090181c13dd23e17bc81a3223d5340914c39ce427325c6267e7546a87a2
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 440320
Filename: bmx7_r2024061001-r1_mips64_octeonplus.ipk
Size: 165027
SHA256sum: d98ce5d6c7d126b4c61397a6fc16468f5ac141fc42554ea938f335e08e903e75
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mips64_octeonplus
Installed-Size: 839680
Filename: cjdns-tests_21.1-r6_mips64_octeonplus.ipk
Size: 328219
SHA256sum: e2054a5c9b01e5b442135de9acebe656ee7fefa6b00a618a5dd2a1aaba4e8a19
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mips64_octeonplus
Installed-Size: 1003520
Filename: cjdns_21.1-r6_mips64_octeonplus.ipk
Size: 384457
SHA256sum: 5888503f7cdcce9c58cc0853a2430b724bf9872f5da6fb0949ae83fef92894e4
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 1424
SHA256sum: 613e54e565abad5a60e6049bc6975844afe13ca7e686903c2dfd007f09997873
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 960
SHA256sum: f75dafe4de0d422bf030bcea47d5ec5d373efebde615fdf4e469c701d9dfae67
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 945
SHA256sum: d6d041061b1eaeb8daf54e7b3840c7eb06064253db108bc32599d6a9677830c7
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 307200
Filename: hnetd-nossl_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 108066
SHA256sum: 3a0a5f6cb0761f6e8caebf05ad80aae2b327b93f7282d0da969388ce4e66e362
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 307200
Filename: hnetd-openssl_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 119481
SHA256sum: e4c10834d3b1100c87738f734ba76ae7b3a0d0c29dd249aa33d2610079bc0f03
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: mips64_octeonplus
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_mips64_octeonplus.ipk
Size: 6591
SHA256sum: 57b60b48b18b74616219e2920201832c2be3cb50ceb5c85230a7ecab1369923b
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mips64_octeonplus
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 57620
SHA256sum: 517e4aab077cbd632b2a89cd6e45bbf5b93a31adcd808801e8755277542b7d98
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7779
SHA256sum: 596767fec4e045b69d9d404a48564028110f0c54316a25143bd12fab05998091
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25669
SHA256sum: 15f78044bf83c22a9b21793f7ea6d6746fd84135860fbfbad583f220b1f4aa4f
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mips64_octeonplus.ipk
Size: 8325
SHA256sum: 099dad97f25e2d86fa7ad0021dd866a330d46fe0ffd971b06b1d379426af1a86
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2851
SHA256sum: a9a07dc66cb1afb09c2eae025ad20f1f3bee4ce83e3a2c0b9ee4bb9332cf6c56
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_mips64_octeonplus.ipk
Size: 41367
SHA256sum: fe4c98710d7b378a3e3b1d28ef30be974dcf1093078fa1d5cdc375bb0d89d224
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: mips64_octeonplus
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_mips64_octeonplus.ipk
Size: 50560
SHA256sum: bb03caabc97024c77904078393dd0f2088ffe0399663ed0e92a4dcd196b727c7
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mips64_octeonplus.ipk
Size: 13047
SHA256sum: d51d5251ae1ba26625e86ccdaf1b85c058b25410dd6443a5c1522e14a27d4517
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 2801
SHA256sum: 55df2a0ebfa3c4bb55b5d4d15903d3dd7ec06c01bf1e1d2b772db2ea24c7097a
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 12745
SHA256sum: 1b3223c7019915e18bd16224a88b7b6be672f198d48c3723ce3685db1b71db2f
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 4503
SHA256sum: 5d6a06314501075967e2bbad81087867d752980fd3b9f6d06731ec6f41fa5bf2
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 3120
SHA256sum: 32c44b296997baf0e016ecace7fc8692489d6ab68a6366aedb15f9ece6180144
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 4943
SHA256sum: cd6b530625e2ba5f2c74cb7fa94e32d257b6a4751f4783d4a40a2f538936d0e6
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 3378
SHA256sum: 4a243eca4e5d5b9275e211ba5819e3d5b8ee11d805971f3556206480dea60d3c
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 31175
SHA256sum: cd5db14022b833e0d68efafe15f298e783a463178ae02ae91ede8872e11b41c4
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 21619
SHA256sum: 574f4e02b42508c7127e72cae757f0b422b8a0352361a21618a072bfa6b883c7
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 9535
SHA256sum: 96e5b5c6486509446a7e9ed15a29041096fc913c309f9b5ab6828adacafadc72
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 11721
SHA256sum: c69f6ac6566ec5397163bcf6c96b564ba9c100bc4b431c8db1ee2e4a671d6ab4
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 13256
SHA256sum: 30b7355ad4ed6fe7773e87eac6564bb024e3ea540a0136d11e0a82351614a865
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 9231
SHA256sum: 7b2dc10bfc0996b46c2b1b94a3306bb8758f8ea93311f36aaa80486aee09ba41
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 3659
SHA256sum: 8d825da9a90765e2f1f52758ed4a5aaedd6c3eb26deb4b658f42ac01d5e51dba
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 256000
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 57604
SHA256sum: 93282c39a5ff23fa638f1d0087d6a140148fb1cc1b94b5ad5e59d6fb6698d7e8
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 6986
SHA256sum: b34f974b63104b1db7de0fcd3cdd589bc94f0d0a06d18e52f7071a97820139d1
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 10940
SHA256sum: dc858724fc19e730346d2513f1b0405ada52be08aa92de6019f11f5f4bfc0c67
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 5210
SHA256sum: 644a2b2d6e191858ec3ecc340d7b77b80775cf9e6c0b64830fdd888d6cb7054e
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 15145
SHA256sum: 13ec7b30056dee8caa359508acca00848707b46aaff8e594d9a92d4ab7cb0209
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 2459
SHA256sum: 9b16ff5a8cb30f2ee1e9757d8db322b3aa2264b5ef71f3f99b193241d2a47c44
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 1955
SHA256sum: c33e9105cd4d69ebddb83cb1dbbbd7148dd9764312b4aa255cbeca490de927b2
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 378880
Filename: olsrd_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 134164
SHA256sum: b2b3514e6eaa9ad03b6c98fa8e0997c42769a44ae5345524836b48e714891789
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 512000
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mips64_octeonplus.ipk
Size: 168897
SHA256sum: 1b2fb02a5aaf1077a7649f2de7b6b3f1e840948fe8c0d96cd0e8e7c001a10cc1
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 512000
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mips64_octeonplus.ipk
Size: 164427
SHA256sum: 054aef680de6a26ae8ca31467e2f57cc4e34f816ff935b195266be9b848998a1
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_mips64_octeonplus.ipk
Size: 2303
SHA256sum: 2cc0e1d01846a45ccb7045c7e43105d127d78043698bdb1ec0d89aa6c6869d86
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 727040
Filename: oonf-olsrd2_2022.08.25~1cec9b21_mips64_octeonplus.ipk
Size: 244546
SHA256sum: 8cd25bda421fb9b87e58af9dbfe046833e04ee69129006d5a04a11d6bc421450
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: mips64_octeonplus
Installed-Size: 706560
Filename: opennds_10.3.0-r1_mips64_octeonplus.ipk
Size: 163956
SHA256sum: 4a78dd485e4bcf8dce43c8712cebb4e2898f26f1788488c83b22596e8e3f4b4e
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: mips64_octeonplus
Installed-Size: 286720
Filename: pimbd_2018.06.19~dbf4e591-r4_mips64_octeonplus.ipk
Size: 88565
SHA256sum: 4a5fc369b9151b174a63b8ec69ed166dabbf182084473296eecff91741fd0e17
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: mips64_octeonplus
Installed-Size: 215040
Filename: prince_0.4-r3_mips64_octeonplus.ipk
Size: 34979
SHA256sum: 5e12532476922d678c978e6867bda29e49e98628a71b8de10c5d58d516c7ff15
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_mips64_octeonplus.ipk
Size: 12799
SHA256sum: b7a933e5613416dd451f09b7d350956d67c665b1e0186be63547163a4dfd5be1
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mips64_octeonplus.ipk
Size: 10766
SHA256sum: 057e1eaf4b117bf945b5010deb2f76316e3543cda8d6b4a98c02ae3babba7048
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.