Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: mips64_mips64r2
Installed-Size: 81920
Filename: ahcpd_0.53-r3_mips64_mips64r2.ipk
Size: 25409
SHA256sum: c88cf80d7c0b95a40a8523f8719bf6137ae056cfa8bf9330237fba11e03655dd
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_mips64r2
Installed-Size: 153600
Filename: alfred_2024.3-r1_mips64_mips64r2.ipk
Size: 29285
SHA256sum: 61ed9578c6aba24af1b2eb1555a75e6d2ab712b62eb8478f2f30f27bb45ca51c
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_mips64_mips64r2.ipk
Size: 4965
SHA256sum: 07f17a9937dcb265edffe920e843c88869185ae816e81d25d66fd713b3660fa8
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: mips64_mips64r2
Installed-Size: 225280
Filename: babeld_1.13.1-r2_mips64_mips64r2.ipk
Size: 72825
SHA256sum: 5bc8838ac45cc88e670cdfcf496fde7eb82cb53bdbfeca6342b386b9c3ebbdcd
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_mips64r2
Installed-Size: 143360
Filename: batctl-default_2024.3-r1_mips64_mips64r2.ipk
Size: 45444
SHA256sum: 3bac518e9b036fbc278d1050a9e80e42c65acff7b1ab495a2427a5d30def63b3
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_mips64r2
Installed-Size: 143360
Filename: batctl-full_2024.3-r1_mips64_mips64r2.ipk
Size: 52501
SHA256sum: d674103cadb6fe4af8afafa975d740240de094c8257539f118d3894e0c02677b
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: batctl-tiny_2024.3-r1_mips64_mips64r2.ipk
Size: 15756
SHA256sum: 08ed0ca1424a30fcef2d28efa7c1b0ab15be82c4e521e7bf87718bdb57531cc8
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_mips64r2
Installed-Size: 143360
Filename: batmand_1440-r1_mips64_mips64r2.ipk
Size: 43878
SHA256sum: 98c09b7a412a78aaa5d830633fa10a133e6a1cac1c3c1fdd8f8b3f4179dfe643
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips64_mips64r2
Installed-Size: 1218560
Filename: bird2_2.15.1-r1_mips64_mips64r2.ipk
Size: 412780
SHA256sum: e7cf88db84c593379a1dcd0e992f36b91e8a3d4e677b506826576ba3cc312a71
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips64_mips64r2
Installed-Size: 81920
Filename: bird2c_2.15.1-r1_mips64_mips64r2.ipk
Size: 11058
SHA256sum: 96ffbff332acc93e4a7e8e10024a97eeed8e30f71885f8d16b3e8f4cdc9f88df
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips64_mips64r2
Installed-Size: 81920
Filename: bird2cl_2.15.1-r1_mips64_mips64r2.ipk
Size: 9649
SHA256sum: 59b5c91e945a5d3cbdb2e6a9251f173234b5b15fdf9000a85aa6912d69c302c6
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024061001-r1_mips64_mips64r2.ipk
Size: 4672
SHA256sum: bacc7069df51a9ab862c2abf93ccf5c4f6cfe95fb5b1a0965910f87642b7674d
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: bmx7-json_r2024061001-r1_mips64_mips64r2.ipk
Size: 8414
SHA256sum: 904f8adae803e592e35c5fd4e2dc5c4bad15bd615fd5d48023ee8b561d05324a
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: bmx7-sms_r2024061001-r1_mips64_mips64r2.ipk
Size: 6157
SHA256sum: 061f928ae8aeccb0bd8260ec1f40bc8e1a32eeb65b0a84fa4f51dcf8cf2dbf7c
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_mips64r2
Installed-Size: 81920
Filename: bmx7-table_r2024061001-r1_mips64_mips64r2.ipk
Size: 10100
SHA256sum: c1da50d9a6db4fce8bf322e2a659b1737e073697eb3ac3e093669036260ababe
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: bmx7-topology_r2024061001-r1_mips64_mips64r2.ipk
Size: 5595
SHA256sum: e19938224748823f7e89e3a7867cf342c34e50d3e685db903ab1cf6911e1a4ac
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_mips64r2
Installed-Size: 81920
Filename: bmx7-tun_r2024061001-r1_mips64_mips64r2.ipk
Size: 25392
SHA256sum: e2f0100ad7e4f2a627754f934291f6895858eb24fa0d357f2a501c4799b7f848
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_mips64r2
Installed-Size: 81920
Filename: bmx7-uci-config_r2024061001-r1_mips64_mips64r2.ipk
Size: 8779
SHA256sum: 6e5cd9b9362fb9564b1bc196e6396715b6364205ed057c739c83028cb8bed360
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_mips64r2
Installed-Size: 440320
Filename: bmx7_r2024061001-r1_mips64_mips64r2.ipk
Size: 162959
SHA256sum: 281b80b9ffd0fc184730c9760248e8eb655a68b6f0afce1f7bc9b046017eb871
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mips64_mips64r2
Installed-Size: 839680
Filename: cjdns-tests_21.1-r6_mips64_mips64r2.ipk
Size: 323616
SHA256sum: d2a73b1fc8fa7f3dc39a7fee080f7a78ed0aa245f0eee5fe56fc47ee1d6f0622
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mips64_mips64r2
Installed-Size: 1003520
Filename: cjdns_21.1-r6_mips64_mips64r2.ipk
Size: 378518
SHA256sum: 73b4214f7c8ce2052c2f9b4627fa114784852c12bec3b16ed201bc2881e79902
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_mips64r2
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mips64_mips64r2.ipk
Size: 1420
SHA256sum: 9b0db867ec897f67d07c9bda5721ff12ff3f11cd778038d444e80bd140602545
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_mips64r2
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_mips64_mips64r2.ipk
Size: 954
SHA256sum: 224287fe3b8696dcceb48822da2ef8e0499192084181f21ff65518a0db520a7c
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_mips64r2
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_mips64_mips64r2.ipk
Size: 942
SHA256sum: e9ec625d7c859d7e48b133cdf2992eb9be3cbe3792f00eabcf9f282c2325a6a9
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_mips64r2
Installed-Size: 307200
Filename: hnetd-nossl_2018.12.21~c4376661-r1_mips64_mips64r2.ipk
Size: 107591
SHA256sum: ce68b14aa6400c426253cc774635d0cd1813b7cb530b5ae28760cb04b7709df6
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_mips64r2
Installed-Size: 307200
Filename: hnetd-openssl_2018.12.21~c4376661-r1_mips64_mips64r2.ipk
Size: 118699
SHA256sum: 233f1844453fb6bb7cf7c212f3afb3e5cf741cdf0afef20fdf29db6b3614814e
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: mips64_mips64r2
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_mips64_mips64r2.ipk
Size: 6588
SHA256sum: c3250dd2f4300ec7f3f39da8a63714c696e1016b6eabb0bb50020c31f295b0c8
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mips64_mips64r2
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_mips64_mips64r2.ipk
Size: 57620
SHA256sum: 1ca8f6f4c29b76d3bae8110147cefd87995e3cc608b3d85486773d8aae6b1766
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7779
SHA256sum: 596767fec4e045b69d9d404a48564028110f0c54316a25143bd12fab05998091
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25669
SHA256sum: 15f78044bf83c22a9b21793f7ea6d6746fd84135860fbfbad583f220b1f4aa4f
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mips64_mips64r2.ipk
Size: 8252
SHA256sum: 7bc02694fb29c70792301a6284be66f3febcf8c1f67430175ee80136dd006386
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2851
SHA256sum: a9a07dc66cb1afb09c2eae025ad20f1f3bee4ce83e3a2c0b9ee4bb9332cf6c56
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: mips64_mips64r2
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_mips64_mips64r2.ipk
Size: 40973
SHA256sum: 411f87983db763f4547e587952314f0309484021dde628f9917d3a5bad46dec1
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: mips64_mips64r2
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_mips64_mips64r2.ipk
Size: 50102
SHA256sum: ac4136e4df6b0194eff7a796957ea5ed87cceaa2536d54e141d4c7b3fc3e1020
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips64_mips64r2
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mips64_mips64r2.ipk
Size: 12998
SHA256sum: 77270a99adfa40e852e94e04094d529d38d4ec5577498cd3d57fd7919e4e3843
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 2789
SHA256sum: 153aab5bd009f15a97fcdb1dfcc8ba78316f8eebe2687a97b3df3490f1f9f2f9
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 12565
SHA256sum: e59687ccdbbdb5aa5d9ea984ad2bb4f684a95931dfdea0af37d8140ffdca7340
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 4463
SHA256sum: f131e52e5fb5dd4c639eeef3e021e3c506bdabe545dee70491326db314a1db77
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 3106
SHA256sum: ccabaa0666a6951657fefdd8d152159fc9e0f53d7071d32c565170111d76b6a2
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 4892
SHA256sum: abb8264689570b3e787d2d9a665e322ddee06ca9d61eefce0487c1a9c758104b
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 3348
SHA256sum: b3e579ecdaf8222ae7b56b3d5a9f7ab8b6cb8a9baabbafb96f8339e505ff9220
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 31135
SHA256sum: 6835376cfd5ce4498170994e5f290a876cf617dac1104ecdefa0d936053154ed
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 21437
SHA256sum: 3da5d6ad7be94073054e5c66e00ef7caa60dd2b4e4a558a8e769e1a1eaf7bb17
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 9431
SHA256sum: 30f3d2c5124dea2848812d5d39104113a41d414ec96a437f70c067d3ab933ad2
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 11598
SHA256sum: 8235ce31c4af25009b2da6d34fb9cf3da6ff3a4ad60f9e95bc750e886b6f72a7
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 13140
SHA256sum: 22e52504aff0d8ba4c46edb4abc30111f0aa02de5daa12b19af17ca6f4c99d28
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 9159
SHA256sum: 4b61a3ecdbc0ad8e98fbe2ee72f9fc9e063eb22c9ba8a95c38b899bc8b3ba090
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 3644
SHA256sum: b0ff27037167e686e58d2dd4e37047902c7857428ed6867b9b784bb457cd930b
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 256000
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 57583
SHA256sum: 2f9e9780953d9cef576d7b1a180ed777186c5dff8d1c0d9d8c59c920e831eead
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 6983
SHA256sum: 7348d7f6f3d59d4f564eb508b2433c088f268a1e9c3d4adf98d53c0cb00ef77f
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 10842
SHA256sum: 37fec101b32750c06f74c0cccc595dd9fe40f41e9305ea63cb65dd5b47b3e2ce
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 5191
SHA256sum: 959fa4f43abea7ab000ee33fbfe5802a989178b4886b2564f7fc89bb7fe919ab
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 15063
SHA256sum: 216f8de8c618fd863022de09b0a575b7287379e14c24cb4e427a744e62caeb09
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 81920
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 2438
SHA256sum: 77fcacd104c54f41b3b9d12b007515654704efa80ed15cfbc80f802a967c5813
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 1949
SHA256sum: 85d57c4de1d86bd696b3415e9a8a08bacdd602d6b4b6a16e9a0a26252a2164a9
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 378880
Filename: olsrd_2024.06.09~d72be9ad-r1_mips64_mips64r2.ipk
Size: 133159
SHA256sum: 3124bda08dc6398d0342d1b97b50efe97b75adc147d8160bc60555e2f9ab1c79
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 512000
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mips64_mips64r2.ipk
Size: 167620
SHA256sum: f0bda9a0d29a3d1cd6e16cc4f682cfc4bb33d5c2fc4c73b330f72215c6a12c63
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 512000
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mips64_mips64r2.ipk
Size: 163260
SHA256sum: cebc94cd0896203304d7557cbc76e50b10d72328a0c56be56afff90130eba4a2
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_mips64_mips64r2.ipk
Size: 2299
SHA256sum: 8b54dfd3e1daa6916b768f7f5386d2cf54484d61f39d5e958246b6aec56b68ec
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips64_mips64r2
Installed-Size: 727040
Filename: oonf-olsrd2_2022.08.25~1cec9b21_mips64_mips64r2.ipk
Size: 242883
SHA256sum: 587d004ae31d7bd1bb42ea972b5d68c88b9378fa6c4e6a35ec9c0a34641a826a
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: mips64_mips64r2
Installed-Size: 706560
Filename: opennds_10.3.0-r1_mips64_mips64r2.ipk
Size: 162943
SHA256sum: c87f139dc464ad4f991c2932865d719e61be6432eebd2026ecbdd68ad3745016
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: mips64_mips64r2
Installed-Size: 286720
Filename: pimbd_2018.06.19~dbf4e591-r4_mips64_mips64r2.ipk
Size: 87804
SHA256sum: efcfb4dffecc3330ae5373fb55032c591a512f0d65fcdad18cd77366e1eda1a1
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: mips64_mips64r2
Installed-Size: 215040
Filename: prince_0.4-r3_mips64_mips64r2.ipk
Size: 34785
SHA256sum: 317daf4ce0c96a4f7e597a442fe93a45634e62a6aa7a3d703846e59968f4a464
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_mips64r2
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_mips64_mips64r2.ipk
Size: 12793
SHA256sum: a10912412ccd401b7929e60e0f10cd4e2ee9ef88a2123ccda155359e9db50084
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips64_mips64r2
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mips64_mips64r2.ipk
Size: 10695
SHA256sum: 43fec6f276759277009872222136532aba672c35933fef51320aab442a4e1e1e
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.