Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: riscv64_riscv64
Installed-Size: 61440
Filename: ahcpd_0.53-r3_riscv64_riscv64.ipk
Size: 24980
SHA256sum: 8ebef0612b93becaf956b6bf90797a6e1de3f91580d1440dc387f654b9c214a9
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 71680
Filename: alfred_2024.3-r1_riscv64_riscv64.ipk
Size: 29804
SHA256sum: 4d40cf9f3277951a45f882ccef5940734dc6bd40909caef5f55a4e26a6b1b079
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_riscv64_riscv64.ipk
Size: 4991
SHA256sum: 4102bbb33dc57ac27748823c0e3d08924bd06353da23c67b36771e16777f0947
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20250102, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: riscv64_riscv64
Installed-Size: 143360
Filename: babeld_1.13.1-r2_riscv64_riscv64.ipk
Size: 73218
SHA256sum: ada66edc32f12ba52d224351ed15595a215ead7becf29494710424b8c570f2e5
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 112640
Filename: batctl-default_2024.3-r1_riscv64_riscv64.ipk
Size: 48506
SHA256sum: b27f24a05cab6238e5b60010f7362d0f5787aab8df05836c8e6e52645895c2e4
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 122880
Filename: batctl-full_2024.3-r1_riscv64_riscv64.ipk
Size: 54954
SHA256sum: f7fbd6530dfc523b2afa74c1e353eb432975795c1d983f4c8cfacc14222aa4e5
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 51200
Filename: batctl-tiny_2024.3-r1_riscv64_riscv64.ipk
Size: 17269
SHA256sum: 3169459df11441acb2dd9b7f1e9954335fdbf2825021459340733cfd11aa8ea6
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 102400
Filename: batmand_1440-r1_riscv64_riscv64.ipk
Size: 45561
SHA256sum: c6f0dd0d05082721507aad6b246b817b27f0b3e3479722cfc5faf449716ad780
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.16.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 1054720
Filename: bird2_2.16.1-r1_riscv64_riscv64.ipk
Size: 443940
SHA256sum: 4dad86da514ce6502ca1ec337a9b6e4562fbd6641bee62ef2aa6efd2164a617b
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.16.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: bird2c_2.16.1-r1_riscv64_riscv64.ipk
Size: 12011
SHA256sum: aa52eb71282432e0c9c5f01dd0a7f5e77773aee56c1984c62dbb4de74cd400ea
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.16.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: bird2cl_2.16.1-r1_riscv64_riscv64.ipk
Size: 10876
SHA256sum: 2fbbfa280cdb0e9db7613f7dd7c26cd0aa96a9bc3b435a637d12dbfa92c509c5
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bird3
Version: 3.0.1-r1
Depends: libc, libpthread, libatomic1
Conflicts: bird2
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 1198080
Filename: bird3_3.0.1-r1_riscv64_riscv64.ipk
Size: 529580
SHA256sum: 43b925c1282602371c6a097a719c50d59ff4991ccf6e13060695af3383e4e323
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 3.0 branch of Bird which is a multithreaded rewrite.

Package: bird3c
Version: 3.0.1-r1
Depends: libc, bird3, libreadline8, libncurses6
Conflicts: bird2
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: bird3c_3.0.1-r1_riscv64_riscv64.ipk
Size: 12099
SHA256sum: 2ab4eb1d1f22f3ff1969931424d4bd45c426d2b6925cfe0ce7f812a037a3d15b
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird3cl
Version: 3.0.1-r1
Depends: libc, bird3
Conflicts: bird2
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: bird3cl_3.0.1-r1_riscv64_riscv64.ipk
Size: 10963
SHA256sum: 75fea63e2469bbc737b6ebc89ec45d0f5559c8dfe77bcd164293bceddea3e220
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: bmx7-iwinfo_r2024061001-r1_riscv64_riscv64.ipk
Size: 4800
SHA256sum: bb6540f37e6bf753f392a83813bd44fcbf73f2c4477d4b30dbcc17a8346e1846
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: bmx7-json_r2024061001-r1_riscv64_riscv64.ipk
Size: 8733
SHA256sum: e58c8c7f1ee2eb8aed7f3a82afb992bd304ccb4d0baaee2bac0de66e51b14179
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: bmx7-sms_r2024061001-r1_riscv64_riscv64.ipk
Size: 6467
SHA256sum: 0b0897e8ced1b89feada4cf905e5b6fe9f56a5541a51cdcf664a24ad9c85bcdc
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: bmx7-table_r2024061001-r1_riscv64_riscv64.ipk
Size: 10487
SHA256sum: 25777d2529a4cf7ead505e4102f278948ae6cca56239fc3098c9019f399ba794
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: bmx7-topology_r2024061001-r1_riscv64_riscv64.ipk
Size: 5799
SHA256sum: 8a9a1dd4d3259150494ab52cab5c603535ce6e126bc2575bed102b7a37186e25
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 71680
Filename: bmx7-tun_r2024061001-r1_riscv64_riscv64.ipk
Size: 26640
SHA256sum: 8dadc4df367f84e1b9fb399a7b547457f910eb908a44457d5fa91cca8d53c026
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20250117
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: bmx7-uci-config_r2024061001-r1_riscv64_riscv64.ipk
Size: 9146
SHA256sum: f5d3fd9303c5e9893e989d2235574ce0b204696e6caf9b0483de2cbadb3c0ea8
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 337920
Filename: bmx7_r2024061001-r1_riscv64_riscv64.ipk
Size: 172122
SHA256sum: a3560ad5d529d9a97ec63232630b237d309dc4bcaa43a609d795d99fc7b1bf96
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 1418
SHA256sum: cd49728112e6fa930b60a0f71b29b065fdb6ba55e9216c634db6b42283d21603
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 953
SHA256sum: dc8f76e32cbfb0a32519df71b5cd6c4347b32480dcbda53e3becf2dffb8f478e
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 937
SHA256sum: c5c6de1c196549a4732cd1465e1e2194098a7b7b9e4ce8a7fd16d418692c21cf
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 215040
Filename: hnetd-nossl_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 106509
SHA256sum: ae8284c81944df6d0b75393c920ad6f77b73574e8aad0dba63c472aa69d53b9b
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 245760
Filename: hnetd-openssl_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 117191
SHA256sum: 7f3b965e5cbc6e74631aa89df0f68123aa33d8c888be9a9fd752f6e5b4951d6c
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_riscv64_riscv64.ipk
Size: 6587
SHA256sum: 07ab0de68691e2582a260a169a2d7041af7600b5bf43c51fa1d05174a705373f
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: riscv64_riscv64
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 57612
SHA256sum: bfd162d590dbb15a5653d8e0995948bd09f7a3397b8052a17bfd9b73b31f2ea8
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: 8a15a6505817624e1b8d2d98242513f47ca69f7b4fc1d6a30222ee53c7ee0515
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25667
SHA256sum: c81c49e10383644c39c0f522b1a3479964b70c1a43915683cc6ebb3f68ef3b2a
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_riscv64_riscv64.ipk
Size: 8203
SHA256sum: 72e21c00161434598ea89ef94a402b89669a13180a13282eb3c574d68ade11fd
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2857
SHA256sum: 6cd75ad57734f1117d9d271e6ca38c93e94f83919f6bdea138632b5c2516d520
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: riscv64_riscv64
Installed-Size: 81920
Filename: ndppd_0.2.5-r2_riscv64_riscv64.ipk
Size: 34872
SHA256sum: 8c0fe5cb71d318fd40714f77ee08261aa96a880bb37f21025b0dba5eba02898b
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: riscv64_riscv64
Installed-Size: 133120
Filename: nodogsplash_5.0.2-r1_riscv64_riscv64.ipk
Size: 51434
SHA256sum: 76c5bc1acabaa2dede5f635e99ac9b0b8f1bb8469c16188be9af6ba75f3984b5
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_riscv64_riscv64.ipk
Size: 13331
SHA256sum: 2d83e885c799cc6570139e962c1d7d256af338418f8399087e6cbbbb4027f6f2
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 2913
SHA256sum: 664561592a72d95e468cd2506f98d709ae98fa6b187a05f95bf1b55eaa6076e4
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 13923
SHA256sum: a1fadf981334c821832302a049f397c198a4c1ee6dc2a99b1fb14e76ba665a9b
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 4827
SHA256sum: 81063d6f3a6aaa7abd7b513760be0bb750141e58a864fa057cffe3a8d05cfb2d
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 3333
SHA256sum: cbcef11fee79fce20da8dc70b781363c1301c9a040c0d3d48f134534bf4e8abd
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 5195
SHA256sum: 7e82fba2fbe9c6d08e06ca09355d1ea5721f7ecc2a56ccbe4b9afeaebe72cccc
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 3515
SHA256sum: 651e5dac2ae4ae91e6649650147acd1216025a79320c15c7c093157cd6f59177
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 81920
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 32722
SHA256sum: 32741017e8e854fb2fced020e7f06b656aa0255cdee35e3db904b9a76541a3e9
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 61440
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 24230
SHA256sum: dd3847896a4c29022f98610daa7361c0712907368b55e584243ce69ef075043a
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 10663
SHA256sum: 35182cbe27896c45626390241906d4757ffbd4e29e36af77456bafcddc0feaf5
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 12691
SHA256sum: 6606af8dd79e1318965e75cfdc74f6889fe82043b2f66e44a5baa85c5f28d195
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 14426
SHA256sum: ad64a1e7064369841431d049e7d77e5008ee92510074b7e142bbb0911b5a8500
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 10273
SHA256sum: 9209e16e6abda39a362725d8019fde2463a492ee85b19b8c1c94e85c76f243f0
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 3860
SHA256sum: c94d35b558586deebf436bebc722b3702d4597a240168f7578a5efebc04edb67
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 174080
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 63219
SHA256sum: 764c101031e7b39f3c03872fbd9235083c844dc115248b9e19833489b3459aa1
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 7618
SHA256sum: b3f7f9c35124f6291aa623c2078cc9ac4fa219096e5edef70f692b5bf2ab5788
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 12662
SHA256sum: 26b37a7fc1344788e13020dad0063ad5fd16b8d41455fc025be8d567fcb272a8
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 5315
SHA256sum: a2ba441b2af7bfccce2599c0354a7dc4ebdcc143ed497db2ab734e59ecfa6b27
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 15996
SHA256sum: 840835537efe7d0b43d30d906628650118eeabd5e20c72c60833827810564522
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 2535
SHA256sum: 98370d1bd3bafddca40e6c88aa88c8b23594c60542e7ac12eacec4edd4b10a60
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 1948
SHA256sum: eb20da5ccd9e6a3d1d2731d383f85f06b0bdcbebac8fa42d73b1ce12ac716c0f
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20250102, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 307200
Filename: olsrd_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 144413
SHA256sum: 164dfe5e1e6f8e070f0da30781b6ad54edd93913740d41ebf7fc4c18469657df
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20250117, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 389120
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_riscv64_riscv64.ipk
Size: 180764
SHA256sum: 9dca77d96904122039d51029e066285c33877e91cd98ef8a3e62b425b74a7174
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20250117, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 378880
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_riscv64_riscv64.ipk
Size: 176450
SHA256sum: 32eea5361f81e05701bd4678589f69a06af7e37ef550ffaf6b3e93b4f7247b3b
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_riscv64_riscv64.ipk
Size: 2295
SHA256sum: 2f5bdcf3b32952161abfbbefd88ce027567fb8a51cc729f54ef24cd0fa06998d
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20250117, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 552960
Filename: oonf-olsrd2_2022.08.25~1cec9b21_riscv64_riscv64.ipk
Size: 258535
SHA256sum: 5b7525bb0a78157e634f28943c48e74e1bb447ab066e53a3c54e2ab9631dc925
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: riscv64_riscv64
Installed-Size: 563200
Filename: opennds_10.3.0-r1_riscv64_riscv64.ipk
Size: 161513
SHA256sum: f0f9ed3070512b3e38e5d5e48f0fcd42dbf4c96f160c34233bf604b6ffe34b5c
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: riscv64_riscv64
Installed-Size: 204800
Filename: pimbd_2018.06.19~dbf4e591-r4_riscv64_riscv64.ipk
Size: 88773
SHA256sum: d7eec3aaa83a61e1c5ce1d7f12f5f922d90bc15efbc861c3d3e6e95edf34c128
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: riscv64_riscv64
Installed-Size: 92160
Filename: prince_0.4-r3_riscv64_riscv64.ipk
Size: 31720
SHA256sum: 4f5c6a2e2ebf2b0dc8d81e5da24377b37a45c4de1ddd41589f7bfb148d53d59a
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: vis_2013.04.07~7710cce4-r9_riscv64_riscv64.ipk
Size: 12397
SHA256sum: 7618665d35ef77f2efa972c1db0005e69f9af626b1b75beac98d0e71b78b6cb6
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_riscv64_riscv64.ipk
Size: 11094
SHA256sum: dcf87745a2a7f2994cdd33af3d4e2df5d6171579d6ac2d2eb41c6997d5dfde08
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.