Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: loongarch64_generic
Installed-Size: 71680
Filename: ahcpd_0.53-r3_loongarch64_generic.ipk
Size: 28094
SHA256sum: 29415908513e16ec31229dba7e8101efed4136977e8aa10776113313ca51670e
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: loongarch64_generic
Installed-Size: 102400
Filename: alfred_2024.3-r1_loongarch64_generic.ipk
Size: 31720
SHA256sum: b19e6319c47fcb438d31fd8be4f1d7b89613f705979c22ac736e9568b16009f8
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: loongarch64_generic
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_loongarch64_generic.ipk
Size: 4907
SHA256sum: fc20250feae585742d660c2a3c69419728bd3dd5293bc29e6047b1bf4e4e9b97
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20250102, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: loongarch64_generic
Installed-Size: 184320
Filename: babeld_1.13.1-r2_loongarch64_generic.ipk
Size: 83492
SHA256sum: 33c0289eaa6359b32d35cde25c0a16f0c5fef8a99b8e7445d7ef58cc7a3e24f6
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: loongarch64_generic
Installed-Size: 143360
Filename: batctl-default_2024.3-r1_loongarch64_generic.ipk
Size: 53713
SHA256sum: 70496d5c168691b38f3439ed1639a0d31f3d256e03ca40332a7f956a4007a022
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: loongarch64_generic
Installed-Size: 163840
Filename: batctl-full_2024.3-r1_loongarch64_generic.ipk
Size: 65435
SHA256sum: 7a8f2e8a47f22a6a5864cdb05b31cf3e5a217d8faf5271c1a8eaf32edceff463
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: loongarch64_generic
Installed-Size: 61440
Filename: batctl-tiny_2024.3-r1_loongarch64_generic.ipk
Size: 17976
SHA256sum: 5e847b3f8a9338c5db45025cbf132f2627dda705314acaecda0ec4e64e16cf72
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: loongarch64_generic
Installed-Size: 133120
Filename: batmand_1440-r1_loongarch64_generic.ipk
Size: 45199
SHA256sum: cfb7d1423ddcf27cba3a041b801dbab676de28f9693446e62a373fb414024bfa
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.16.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: loongarch64_generic
Installed-Size: 1331200
Filename: bird2_2.16.1-r1_loongarch64_generic.ipk
Size: 524106
SHA256sum: 8da9eb3382a6395eb32caa08dcd0de6a7b3ce8dd9478f7dc11109fe4036a9b62
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.16.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: loongarch64_generic
Installed-Size: 40960
Filename: bird2c_2.16.1-r1_loongarch64_generic.ipk
Size: 12122
SHA256sum: d229d1c236b96acc3f0962e60e5a391ac357e96b4a87f2882e826b22c555e284
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.16.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: loongarch64_generic
Installed-Size: 40960
Filename: bird2cl_2.16.1-r1_loongarch64_generic.ipk
Size: 11293
SHA256sum: a68e2415ce35881ac917c831c10d4ae3ffdad63a8f56c1bce1f1892706b7c54d
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bird3
Version: 3.0.1-r1
Depends: libc, libpthread, libatomic1
Conflicts: bird2
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: loongarch64_generic
Installed-Size: 1576960
Filename: bird3_3.0.1-r1_loongarch64_generic.ipk
Size: 662949
SHA256sum: 5926c59f54ae46cad9ca836b59c8c8148ad33e9ff1ca04e04e353cf3e5eb6c14
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 3.0 branch of Bird which is a multithreaded rewrite.

Package: bird3c
Version: 3.0.1-r1
Depends: libc, bird3, libreadline8, libncurses6
Conflicts: bird2
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: loongarch64_generic
Installed-Size: 40960
Filename: bird3c_3.0.1-r1_loongarch64_generic.ipk
Size: 12246
SHA256sum: a3650611cb5f5d3401749d4f865956b1fe42ff7744346701ae8727eb4b2aed2c
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird3cl
Version: 3.0.1-r1
Depends: libc, bird3
Conflicts: bird2
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: loongarch64_generic
Installed-Size: 40960
Filename: bird3cl_3.0.1-r1_loongarch64_generic.ipk
Size: 11394
SHA256sum: d5a09b49108fc8d56215c8cbd08dd545516bd4fc166b85456dc4cf5e835906e4
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: loongarch64_generic
Installed-Size: 30720
Filename: bmx7-iwinfo_r2024061001-r1_loongarch64_generic.ipk
Size: 4994
SHA256sum: 99f421f7015514a6578ca27ad9f968e9090aed1902c0478ebfeacbf5eb69c3c5
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: loongarch64_generic
Installed-Size: 40960
Filename: bmx7-json_r2024061001-r1_loongarch64_generic.ipk
Size: 9227
SHA256sum: 2e262d051273b944cd2e252e14349dc730da7db1c9228a3e0e14fd5feefeafe8
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: loongarch64_generic
Installed-Size: 30720
Filename: bmx7-sms_r2024061001-r1_loongarch64_generic.ipk
Size: 6578
SHA256sum: 6ff291f054f2563d7e9a31eefedd28c55b6cbf02ed1df5e4a70cbc03c37b45da
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: loongarch64_generic
Installed-Size: 40960
Filename: bmx7-table_r2024061001-r1_loongarch64_generic.ipk
Size: 12578
SHA256sum: 73d2995d9583fad5fd7259cbebcf7668f5300e5759247355178e1d1ce5b1fb03
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: loongarch64_generic
Installed-Size: 20480
Filename: bmx7-topology_r2024061001-r1_loongarch64_generic.ipk
Size: 6330
SHA256sum: 52f43320cb64d354ed189bed2c20fc1837185ef7dd9af3e5900c705b0fde5a29
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: loongarch64_generic
Installed-Size: 81920
Filename: bmx7-tun_r2024061001-r1_loongarch64_generic.ipk
Size: 29605
SHA256sum: 42c67860e468402235d74ebb08448343b8a6252d219baa1de138882a05f2b276
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20250120
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: loongarch64_generic
Installed-Size: 30720
Filename: bmx7-uci-config_r2024061001-r1_loongarch64_generic.ipk
Size: 9430
SHA256sum: e2d737276e764b8ee3d9c422175516fc593dd7e518c2ee2768d534c73d4fb021
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: loongarch64_generic
Installed-Size: 450560
Filename: bmx7_r2024061001-r1_loongarch64_generic.ipk
Size: 207748
SHA256sum: 9e207e3fec588b8e6d9e8e78c1c45e1bbfd9de53d64faecac753b1062d3e451a
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: loongarch64_generic
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_loongarch64_generic.ipk
Size: 1421
SHA256sum: 8bf3167df02582dcba9da668db3cb9f27256c0c11f63ed8af105e43192ccad7c
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: loongarch64_generic
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_loongarch64_generic.ipk
Size: 952
SHA256sum: 92942fdf3ed464263aed35101e48d22ce894b0af7f3e712129e51bf08acd4625
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: loongarch64_generic
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_loongarch64_generic.ipk
Size: 936
SHA256sum: 8fab610bc8ba413c3d77acaca9098fc6b35530cd66ebbc2edccb94f66466a6a6
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: loongarch64_generic
Installed-Size: 286720
Filename: hnetd-nossl_2018.12.21~c4376661-r1_loongarch64_generic.ipk
Size: 125733
SHA256sum: 78df2754d0974ac17d483061c4fe3497f7854ca3cc5764771d8a22fd4cea657a
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: loongarch64_generic
Installed-Size: 317440
Filename: hnetd-openssl_2018.12.21~c4376661-r1_loongarch64_generic.ipk
Size: 139256
SHA256sum: 0810993f2cfa3f04eec73191beb1084c736ae8ced041fb88564708e8ec4ff356
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: loongarch64_generic
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_loongarch64_generic.ipk
Size: 6583
SHA256sum: 58cbf0524de78a18d43329d49f2bd422e36adb6e0d9940cc2c7ee7441f91ff96
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: loongarch64_generic
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_loongarch64_generic.ipk
Size: 57620
SHA256sum: 68095b2bd26a5b0cb48c82033d1044bddf9077d8994045944ae911a37d458052
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: 038dca35183f285e872b997bd692c8fca4558224fa623e94cb1799e6a42da66e
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25669
SHA256sum: d29b28ece48700f93fea07ff9e20003b87081806597ad8b648f072ead063d94f
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: loongarch64_generic
Installed-Size: 30720
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_loongarch64_generic.ipk
Size: 8585
SHA256sum: 6ae04854fc0fa3a9bfd909f42864e86911fe8a96356d0a019f3f2a120f8e8847
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2850
SHA256sum: fd5677d800533c60e7151c97acf8b0dc71059920665d225b19248a860e87fa3c
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: loongarch64_generic
Installed-Size: 163840
Filename: ndppd_0.2.5-r2_loongarch64_generic.ipk
Size: 61425
SHA256sum: 821453788ed01ae53cc56669f62e6512db3d4c3ad0026b3ed23566ea8b79e7c9
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: loongarch64_generic
Installed-Size: 153600
Filename: nodogsplash_5.0.2-r1_loongarch64_generic.ipk
Size: 53994
SHA256sum: a72bafd7cbb1f846ee5aec0a5fc399149e80f08c7485b0f57f1a3580418c66a5
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: loongarch64_generic
Installed-Size: 51200
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_loongarch64_generic.ipk
Size: 14930
SHA256sum: 658b3c6b2eae281c066094244b6ae48203e2a7d42e7c1d127191c5d0ec84a5f0
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 20480
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 2877
SHA256sum: ca4d5a6b50ed9f71a011e1b9cea7372c2fddd26cd09eceb4119bb2466f8fa931
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 40960
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 15257
SHA256sum: 5cde4f41dd64841036063d235065ec6dd56a32e2ff822b2ecd8de2455f77e858
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 4839
SHA256sum: 2dd5fe371406833c795df932c31e47b041ca0837c77713c60c5f05f46e931a61
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 3225
SHA256sum: 882efb0c77fbff08b4b01578795782f027f986f4ccbc2d9de8e7269852ec559b
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 5356
SHA256sum: ae1b4a33f7c5e575c14ddbb99b9db82f5051bc307d2437c2d61d79e21b77e9a4
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 3476
SHA256sum: 70ba796e2854b267261ba41f6a9dbddafae2ff217191fbc2c00bbe6f10e0b808
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 92160
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 33371
SHA256sum: 4fbe27048a77ec884f946e1787afa6229b93c0cfa8ef2009cb388feea82e63e2
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 25626
SHA256sum: 7c6991cf170f97fca85d99cdacc03f981b872e4a40b7f108b8e71ff8fd9d34ed
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 40960
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 11479
SHA256sum: 8c9518b14e4df1ca1a8577a4c4819b8f48a87feffefd6d358011f266737d4e80
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 40960
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 13799
SHA256sum: 7bde6ee513974d6bf3ad97e6afa45d871f3909f67ce1cc29bc070c35533c56b6
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 40960
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 15738
SHA256sum: 47ba40ab137b820bbf3041fe310c067e49adbf6bc647d29085e68dd51a13410d
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 40960
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 11123
SHA256sum: 6d3962e3a999206d26e28ec75cc8d00cd7fac38ef9f0bc6b759e44d3b67e3352
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 3840
SHA256sum: b7290b64394bcd2ab20bd6df5dee347eadf40d39c5071d1a72f9693ea3f2563e
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 215040
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 67955
SHA256sum: 1e3d02e93061885d07a72b09d5f4e56426847607d103931f78545c8e3b1171bb
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 20480
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 8152
SHA256sum: 089dc6be9ef49753465fa46bb2c14581c4f2c796ae2acf39afb723d99e6a93b8
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 40960
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 12847
SHA256sum: 39e305567aaecc829e2e06ffd6ebb889cb3f67c85e9440c8d77e6e17d06eeebb
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 30720
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 5469
SHA256sum: c3d13333bbac06073d26095d0f51b900a6c3915c86391571f6443182c23b2bf2
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 61440
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 17429
SHA256sum: 8140c32f37557b2b266c4f02fb8688443a37ab1c93807e8abf0542ca480d80f3
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 30720
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 2462
SHA256sum: 756b0b486cabee32e9db0447dda64d03f0eb97977c6b544e2aa6f11261c7ed44
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 1956
SHA256sum: 224ef14872f9f9ea2cc9bf3f0c26f46f1f0e4bf77db6de4445d929c068d9fd3e
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20250102, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 389120
Filename: olsrd_2024.06.09~d72be9ad-r1_loongarch64_generic.ipk
Size: 160876
SHA256sum: 0b60c4b649382993c3437da184ee79a71566b28c2616b7b85f12e52d1a724fff
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20250120, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 491520
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_loongarch64_generic.ipk
Size: 196168
SHA256sum: a09daa211e2c15b3f8c31c598169efddf045780a230c9d91827031a21149dfbb
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20250120, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 471040
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_loongarch64_generic.ipk
Size: 190424
SHA256sum: c8f68833ae21f6d0e09158f9650d32725ba3fdf522a4e10ac6c3ffe2e0003fa2
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_loongarch64_generic.ipk
Size: 2303
SHA256sum: 432543d5d35fe9a784abdbd941aa2248d681a83ad0efbe304739f81578100de5
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20250120, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: loongarch64_generic
Installed-Size: 675840
Filename: oonf-olsrd2_2022.08.25~1cec9b21_loongarch64_generic.ipk
Size: 279218
SHA256sum: 011120e3437663744dd0a1066df12bb1cdd0c5c1e2fbfe97e18916a35fad75e2
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: loongarch64_generic
Installed-Size: 604160
Filename: opennds_10.3.0-r1_loongarch64_generic.ipk
Size: 168434
SHA256sum: c74195d30aa0a976370047449df1eeb54d8eaaccf680a2eeb75af889f958d763
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: loongarch64_generic
Installed-Size: 276480
Filename: pimbd_2018.06.19~dbf4e591-r4_loongarch64_generic.ipk
Size: 107094
SHA256sum: 81c7e0ee6c7328e3d88f37a4748a0926cabc50830463ff54e62b7da051586e34
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: loongarch64_generic
Installed-Size: 92160
Filename: prince_0.4-r3_loongarch64_generic.ipk
Size: 30925
SHA256sum: c883eb4c92e642392e52a716b2cad5e5e46db93d44722c7202233d39f1d401bb
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: loongarch64_generic
Installed-Size: 40960
Filename: vis_2013.04.07~7710cce4-r9_loongarch64_generic.ipk
Size: 13345
SHA256sum: 1dbd7ff3ecdb0596be89a42140279b79e0ad10e09e97ec048641bab91afed3b0
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: loongarch64_generic
Installed-Size: 40960
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_loongarch64_generic.ipk
Size: 11451
SHA256sum: 1d3fcbe04e80283f2c2d2dd04e402638642dee9667004168981edce451534dfe
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.