Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: powerpc64_e5500
Installed-Size: 81920
Filename: ahcpd_0.53-r3_powerpc64_e5500.ipk
Size: 26144
SHA256sum: e58959e90ec483f1d9769d9e2bc5424ac43ad63d8ba7a4b7b5565a652a2785fb
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc64_e5500
Installed-Size: 143360
Filename: alfred_2024.3-r1_powerpc64_e5500.ipk
Size: 29914
SHA256sum: f49a52c72a8b287063c01fe85404bdc3c07f8248ed0eb8f24daa93233d19f72b
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_powerpc64_e5500.ipk
Size: 5169
SHA256sum: b01b99eb458c344edea50c0428d335ff841f9eef0a656c507dd6041d9c5bc6b2
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: powerpc64_e5500
Installed-Size: 215040
Filename: babeld_1.13.1-r2_powerpc64_e5500.ipk
Size: 76008
SHA256sum: 6c19f815ce5695fff7fb16090ec9c4667efa3b6b5ecabbd325a4563080ca9499
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc64_e5500
Installed-Size: 204800
Filename: batctl-default_2024.3-r1_powerpc64_e5500.ipk
Size: 50391
SHA256sum: fe4e18e624e83cc8fb432f8665bfbfc3326d22d6a53805357a033664199914b8
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc64_e5500
Installed-Size: 204800
Filename: batctl-full_2024.3-r1_powerpc64_e5500.ipk
Size: 58003
SHA256sum: 84a580f978db224748afa628b960b2b2aebe9d93545a7b91b3974f099c69bdc2
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: batctl-tiny_2024.3-r1_powerpc64_e5500.ipk
Size: 17805
SHA256sum: 47270141b3b7c39bca01c0fd3f9d8f6d0f9730246048835c046c7f984ea1a396
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc64_e5500
Installed-Size: 215040
Filename: batmand_1440-r1_powerpc64_e5500.ipk
Size: 48407
SHA256sum: aaca3ee8eb8c031824be4768e5648f1f643d4dd258c726463cf1c4e51c56f923
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: powerpc64_e5500
Installed-Size: 1331200
Filename: bird2_2.15.1-r1_powerpc64_e5500.ipk
Size: 449326
SHA256sum: e16330175714a5c534af6f5357f00dbaf9dab626d3ea0b129bec632a292f50a2
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: powerpc64_e5500
Installed-Size: 81920
Filename: bird2c_2.15.1-r1_powerpc64_e5500.ipk
Size: 11354
SHA256sum: 58b1d051d1f7f41c79ad2b6c2d7b56628821184d86c250319a42425c1bc0d71a
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: powerpc64_e5500
Installed-Size: 81920
Filename: bird2cl_2.15.1-r1_powerpc64_e5500.ipk
Size: 9902
SHA256sum: 18870e1a5d4bd4295aa778979585ead12271d75da639e36e3a8a8691e81f1934
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024061001-r1_powerpc64_e5500.ipk
Size: 5246
SHA256sum: d29c813e2bc87dedaaf2164463e0258e49cb0915027222c4f6210a5b3ba4c0ca
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: bmx7-json_r2024061001-r1_powerpc64_e5500.ipk
Size: 9258
SHA256sum: 113dd89a826b7600297748d5becc5aa97c7bd38dfae870ea1ad05652bed862c4
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: bmx7-sms_r2024061001-r1_powerpc64_e5500.ipk
Size: 6832
SHA256sum: 19a3743c7de4b17acb0acd7c9bf585947e3360f2322eb557492430b43a30ee95
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: bmx7-table_r2024061001-r1_powerpc64_e5500.ipk
Size: 11405
SHA256sum: 57dd10e545a15bc53f46dfe61388fc6ddf8112080703537ed58d249a06d7d57c
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: bmx7-topology_r2024061001-r1_powerpc64_e5500.ipk
Size: 6349
SHA256sum: 76ca4155d3fbd1ba628270a8529106121629dbfdd5b3f64e192a4e958917d3d2
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc64_e5500
Installed-Size: 143360
Filename: bmx7-tun_r2024061001-r1_powerpc64_e5500.ipk
Size: 28358
SHA256sum: e93a7294e1291ea5b0fad3532d9063e43beb5c46a66cca7eab775a9bead4f6a8
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc64_e5500
Installed-Size: 81920
Filename: bmx7-uci-config_r2024061001-r1_powerpc64_e5500.ipk
Size: 9627
SHA256sum: 85b62493f1a80edc802e4f5862acc81c814fcb56b351241092a8a90653656017
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc64_e5500
Installed-Size: 563200
Filename: bmx7_r2024061001-r1_powerpc64_e5500.ipk
Size: 191838
SHA256sum: 8a56fa9195d7a0d2a81c0436feea1c623226ed6f92b2630d7c02f72731fb76db
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: powerpc64_e5500
Installed-Size: 962560
Filename: cjdns-tests_21.1-r6_powerpc64_e5500.ipk
Size: 346835
SHA256sum: c368e23c26742e2f91ade35af8dc92c912817633c6ba48886be7c12d53650a3c
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: powerpc64_e5500
Installed-Size: 1126400
Filename: cjdns_21.1-r6_powerpc64_e5500.ipk
Size: 400069
SHA256sum: bb65cbc41e15800db58e46535e6a56d169fd88695fb3171031a0f7861d4f5f67
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc64_e5500
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_powerpc64_e5500.ipk
Size: 1423
SHA256sum: f8cef0f6bc9879a3f8c4e2d9afbf067b3864f2868bc43c4fef80b45208af273e
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc64_e5500
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_powerpc64_e5500.ipk
Size: 961
SHA256sum: 38f957e00271f609398839c55f38fa9e27e599ecfc3ff9d50c65e25655c8a416
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc64_e5500
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_powerpc64_e5500.ipk
Size: 945
SHA256sum: 3643b431e2394f7a69ce21dd882c8bfa3ea1873856065c23dce9514e51e09711
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc64_e5500
Installed-Size: 368640
Filename: hnetd-nossl_2018.12.21~c4376661-r1_powerpc64_e5500.ipk
Size: 112652
SHA256sum: ccd9e90d1d24406c1b33dbac431beeb593aed245d24b8cf2c443fdd9219becf0
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc64_e5500
Installed-Size: 368640
Filename: hnetd-openssl_2018.12.21~c4376661-r1_powerpc64_e5500.ipk
Size: 124655
SHA256sum: bdbe230ebf44acdc56fe53cba5df9aacb7093439f0666fb887a5a1680400be47
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: powerpc64_e5500
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_powerpc64_e5500.ipk
Size: 6587
SHA256sum: f201d1a083f81dece0b6b22145de668f201878766ada360e90958571a7165cef
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: powerpc64_e5500
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_powerpc64_e5500.ipk
Size: 57622
SHA256sum: 2034649f04248a228e3a956c8494dc92beb74f9d13f9879dfc74bfe6a4df631c
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7779
SHA256sum: 596767fec4e045b69d9d404a48564028110f0c54316a25143bd12fab05998091
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25669
SHA256sum: 15f78044bf83c22a9b21793f7ea6d6746fd84135860fbfbad583f220b1f4aa4f
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_powerpc64_e5500.ipk
Size: 8461
SHA256sum: 4923bf5fc432790715f6d78b63570c3455394d3251a26552213c046243ca929f
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2851
SHA256sum: a9a07dc66cb1afb09c2eae025ad20f1f3bee4ce83e3a2c0b9ee4bb9332cf6c56
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: powerpc64_e5500
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_powerpc64_e5500.ipk
Size: 35952
SHA256sum: 865e7a1d2b46783ef1427da6f80ebf6fd324a7a997c7011ea0f65d004e11333b
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: powerpc64_e5500
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_powerpc64_e5500.ipk
Size: 51895
SHA256sum: 732563c66dd2113c31e115aaa80cdf2802852ae0c8aa9d62662747237f323fac
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: powerpc64_e5500
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_powerpc64_e5500.ipk
Size: 13508
SHA256sum: a6e7f1f67b7605014827f3f55e16f6f673d4bb4fd35cb828074e82deb3947234
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 3152
SHA256sum: 3d14bd5af25963a3e364047d57fb526138a4ab07fbda56e118be26bf81ed0bba
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 14757
SHA256sum: c6b34e9c6f6d894db3c9d5c243d84e87d255389eaaeed32a904acb26fe8fd03d
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 5229
SHA256sum: 5d8c7613cbb3e08083f8d361b3b061829c75fdd84fd4b9d26d1ac268fc013d10
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 3588
SHA256sum: 785a81fb35461b360a9f0e17d9f1e5cc01bd4349199ff6538890d0f617f659c9
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 5524
SHA256sum: b4829e21a09d92d7ef6b73ce4e6a56cd227a5b5281f87d49bd7a4938047b7002
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 3884
SHA256sum: e89182117bffa014228903a978f2bcdfd2e233ec8f5939fc30c48030321d396b
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 32084
SHA256sum: a413cd477a4c2fc25ec77bee59b0b3b16c440bc4146b997413b50ae57c622a18
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 143360
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 24385
SHA256sum: fb4ec066dbb7fedfe15bb1c69134f2405a81c46d0bd12e1149ea3b529ab703a9
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 11165
SHA256sum: 5c549db606253ab0973ad45a18e75518a7b88244f7f4361c67c408572c3e3f1e
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 13492
SHA256sum: 91d0d6735e8518ad840b0e116502aae2102fce54337f4cb7d230d3bceb5597b9
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 14967
SHA256sum: ad2eea588a843c8873d5360a30946037e7ca4cd55645675681e03686ac692e89
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 10707
SHA256sum: 3ce5e9ad0519ec54e956dc575c7aa11373488acd1bdabd2be01f249e7ec55cef
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 4067
SHA256sum: c0c184c27811d21df22cdedde164cd0ce67e638925f6c5d21f55e36ca2ca828c
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 337920
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 66011
SHA256sum: d0094a4a38120fc98344eadcad185d8db4c35144cb88769906f0c3f96ce536ad
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 8143
SHA256sum: 3fec6b949f0a74c839fb0cc6d982105cfe5025d8db6d91e79d1b2d273239ca9d
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 11467
SHA256sum: 3cc511df5c80b10cd79895239ad3c719e75948f3ffd86d75b74b83c465755185
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 6024
SHA256sum: 0d5e6c98b78e020941591eaeab53f31201c0df4af10d5954f8e732917eabd081
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 16660
SHA256sum: 6dc5b0a358e5b58338b6bdfe89b2a5cb3b687105ab975792cb2445eb3d79e571
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 2779
SHA256sum: a2a91257f0483d20a3845bd713558eca0286fda651a8f0851e053df55df1078f
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 1956
SHA256sum: 4ae350408ae7462916d61d105d253168dc3b1dac05a8ce7eb2ca5163171bb560
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 430080
Filename: olsrd_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 152115
SHA256sum: 142f63bce8a5b50f0369357bb03f3dac493811a6779145656d017b03376cc97a
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 645120
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_powerpc64_e5500.ipk
Size: 213133
SHA256sum: 769ea1f509d68c91ce71d41c56b297fb96bdb07935a315b1e9f59e7bba98cd90
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 634880
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_powerpc64_e5500.ipk
Size: 207259
SHA256sum: 373e5f59ebce5803a894c2564ed001fe365fa1d24eab917640e89326020bddc6
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_powerpc64_e5500.ipk
Size: 2307
SHA256sum: 394e79913289a2bd73c11962bfc76a318ededc2edbc89b9ac20b502a92af6be4
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 921600
Filename: oonf-olsrd2_2022.08.25~1cec9b21_powerpc64_e5500.ipk
Size: 305165
SHA256sum: 7ddaf674f4eaea68a13df5302a72b85c22e071623e2692840f076eae928750d0
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: powerpc64_e5500
Installed-Size: 696320
Filename: opennds_10.3.0-r1_powerpc64_e5500.ipk
Size: 166986
SHA256sum: 815a49970601ee86fb368dc332e782042fd26da881669d204881c2b50a6f239e
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: powerpc64_e5500
Installed-Size: 358400
Filename: pimbd_2018.06.19~dbf4e591-r4_powerpc64_e5500.ipk
Size: 91562
SHA256sum: ac0f0e2bf8013dd3b052e18f66dbbd052b4a52e50b3a6dca1041fb936ef1eafa
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: powerpc64_e5500
Installed-Size: 276480
Filename: prince_0.4-r3_powerpc64_e5500.ipk
Size: 44016
SHA256sum: 964203dfa7a5aff447bae80b96ece865fb7a07c13f1dc1e1eb4cdef5830aaa72
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc64_e5500
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_powerpc64_e5500.ipk
Size: 13172
SHA256sum: f0954935ac48b8c9280a7a1b180fd42cb14ec4ffe8ae11843d9318c574562f64
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_powerpc64_e5500.ipk
Size: 11065
SHA256sum: 7aacd80f733a5c51130653ffc9873da4fdc70bba3dbdf5fcd5da337e8f9392c2
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.