Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: arm_fa526
Installed-Size: 61440
Filename: ahcpd_0.53-r3_arm_fa526.ipk
Size: 22757
SHA256sum: f0fe1d8749936bcaad8626ccdb5f7277e72c3c7e8314686850d73df73b7fc723
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 71680
Filename: alfred_2024.3-r1_arm_fa526.ipk
Size: 26118
SHA256sum: b36e757c376726f948865db7e4bfd2d5918e2508f06644bd97882ff323dbe091
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: arm_fa526
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_arm_fa526.ipk
Size: 4632
SHA256sum: 03cc4ff3836411ef6514feb073960bce59aadcbe3fe333d2f72cd67cfbefb618
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: arm_fa526
Installed-Size: 133120
Filename: babeld_1.13.1-r2_arm_fa526.ipk
Size: 63358
SHA256sum: 3c2a704a688d898e7dfaa29dc3852191cc96a37c3cbc7a67b95679b905f26f38
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 102400
Filename: batctl-default_2024.3-r1_arm_fa526.ipk
Size: 43643
SHA256sum: 2cd171412ad9bb91e09690baf117400250de53f6ad867584bbd5be465726de90
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 112640
Filename: batctl-full_2024.3-r1_arm_fa526.ipk
Size: 50650
SHA256sum: 64d0b4109a409e55dc71d84b52963d58bd200972d63ee2acb173c3e6d9788d97
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 40960
Filename: batctl-tiny_2024.3-r1_arm_fa526.ipk
Size: 14723
SHA256sum: 1d88ba54472d1858367af643e4ac7c141dc7fc38f950a6111b6b5b94d31717fe
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 102400
Filename: batmand_1440-r1_arm_fa526.ipk
Size: 43338
SHA256sum: 416423102f49ea7ca98406dd20aae8b4b71f9ee7d9f95724ccfd672d407c3da1
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_fa526
Installed-Size: 983040
Filename: bird2_2.15.1-r1_arm_fa526.ipk
Size: 385310
SHA256sum: 71fbc77511404098c27f640abe5f449bd2797e50afd77caffe64f0b648b156cd
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_fa526
Installed-Size: 30720
Filename: bird2c_2.15.1-r1_arm_fa526.ipk
Size: 10473
SHA256sum: 394ae596031cc50c6ed9dad8dced93d0f810a00d634ece3cdd16a2a7b235cc81
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_fa526
Installed-Size: 30720
Filename: bird2cl_2.15.1-r1_arm_fa526.ipk
Size: 9056
SHA256sum: ffa1122757788f92872fb2d61cfc0d5696b7f34691b84db02309f47cf5f7e862
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-iwinfo_r2024061001-r1_arm_fa526.ipk
Size: 4839
SHA256sum: 10d0f82ad85208625fe5bb9e5b01e812e68ce2bd8257c2064021ab1ee9c9bd2c
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-json_r2024061001-r1_arm_fa526.ipk
Size: 8483
SHA256sum: daa0e69993fdd17ef0803b5c27016d0a64cb9aa3c4731b8000b697f7be54c07e
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-sms_r2024061001-r1_arm_fa526.ipk
Size: 6117
SHA256sum: 2f0e932a1ddfe3d6f13315eb0417704ccb129c07946f5e538ede37e1791546c4
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 30720
Filename: bmx7-table_r2024061001-r1_arm_fa526.ipk
Size: 10287
SHA256sum: 415695136c514d18afc0f1c67d0b5b3fbab5e409a4a4dea8cf609b42c5beb0f2
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-topology_r2024061001-r1_arm_fa526.ipk
Size: 5784
SHA256sum: 59dec31c9e702a8bb799048bac55bfbc44d5f09f1d03a45d5ef1ce0b33906074
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 61440
Filename: bmx7-tun_r2024061001-r1_arm_fa526.ipk
Size: 26476
SHA256sum: 2b274aa8d0d65edb1803b83f634defe22e56306e99279acf2d9fc411ae5e1c8e
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 30720
Filename: bmx7-uci-config_r2024061001-r1_arm_fa526.ipk
Size: 8886
SHA256sum: c5038d4e3b86fcb82f5592e0ecd1e8b064c463f0b90bd7a9e97c4c38e6e78906
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 348160
Filename: bmx7_r2024061001-r1_arm_fa526.ipk
Size: 173156
SHA256sum: 79c22533a05377311d66fa6b666e5e8a6b8aa68356179bc03c94e036f1f11434
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_fa526
Installed-Size: 747520
Filename: cjdns-tests_21.1-r6_arm_fa526.ipk
Size: 345662
SHA256sum: 761714719743aa5bc87a8824cf6b811cb283164439b9c07469ff2227f2a8c9b0
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_fa526
Installed-Size: 890880
Filename: cjdns_21.1-r6_arm_fa526.ipk
Size: 399997
SHA256sum: d9bf7737e6f13bb9f331394c1d978f1760899fdcda0ba00a748f5e85874f22ca
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 1419
SHA256sum: 7ed597bff61d239dd52f26d8cdb052b2eb5fdcd2becda9907061c9c6743c8b33
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 953
SHA256sum: 49ed1a985b8d6d481b8e62252150af00ee0f441efc8890c715005b27a88954ba
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 948
SHA256sum: f48ead9714a9ac7205969d7d6eeb8532549fdf950f6976811adda7b70d30e922
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 215040
Filename: hnetd-nossl_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 94750
SHA256sum: ac15f3c0ceaec0c0c4c30fd669fc742cf9aeb125771e6884d08b2486a8a93631
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 235520
Filename: hnetd-openssl_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 104645
SHA256sum: 51018317ef09da4e019a06d42a897703cd00998043a38cd24d37ea7692b07e77
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_fa526
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_arm_fa526.ipk
Size: 6578
SHA256sum: 61803ace4db6b19d0a4e0d56fce97fdbee37d3dbb1f2362983d701d29b0b2b4b
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: arm_fa526
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 57619
SHA256sum: 4bcc2dcc2c4e7433944c917c7d261ee52c17809c1e39053b7e281061d15c149a
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7779
SHA256sum: 596767fec4e045b69d9d404a48564028110f0c54316a25143bd12fab05998091
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25669
SHA256sum: 15f78044bf83c22a9b21793f7ea6d6746fd84135860fbfbad583f220b1f4aa4f
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: arm_fa526
Installed-Size: 20480
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_arm_fa526.ipk
Size: 7191
SHA256sum: 626cb65ae98f00a48d316b7437c105124eadb9dd4f24c2affd18d7959e1a6cfa
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2851
SHA256sum: a9a07dc66cb1afb09c2eae025ad20f1f3bee4ce83e3a2c0b9ee4bb9332cf6c56
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: arm_fa526
Installed-Size: 81920
Filename: ndppd_0.2.5-r2_arm_fa526.ipk
Size: 32553
SHA256sum: 43577e06a1ddf0f4f18dbf8c6aa303c8535b989e577c7dcf89bfaaa56195ebc6
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: arm_fa526
Installed-Size: 122880
Filename: nodogsplash_5.0.2-r1_arm_fa526.ipk
Size: 47604
SHA256sum: 295b4bef671722f4d673415fc10784ef8e02152d5ab3901b8b756bb1ef17120c
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: arm_fa526
Installed-Size: 30720
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_arm_fa526.ipk
Size: 11165
SHA256sum: 421cd79be7c7eaa4a219f367d19233d38cd02cfe645edeee15b125f2de013924
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 2731
SHA256sum: 6b808cb904ade2c11c822c8a1c83d4603eab3c1f6dc6949046679311615b65fd
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 12947
SHA256sum: 337def152dd429cc1766a62b911d16891bf7bfa6a8b414a59057ce6e7f536cc3
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 4577
SHA256sum: fecfc210e212e8c4c1b09cbc2e46f89ad900731da203caf08671ecaba4fa4e22
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 3071
SHA256sum: f6c5acf64466023a299fa2b5753fde663d2865858c9e370fdb7f89e0af4680c8
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 4728
SHA256sum: 2f5ee09025c568d169b19d9b54664ecf762e0378c2e1c16ccde5c7d708ea2129
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 3292
SHA256sum: a1d95c509f48a6431145f380a4b5946096937703778fe1cc87c086019ecc395a
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 81920
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 33497
SHA256sum: 12d271eba273acb7696daff82bb9333ea42aa19f64b261a1d37dc83a64b076ff
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 61440
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 25351
SHA256sum: 8ffe3ef37426ec1c36ce8dd0c8cd9bfbc2c1b4b4318e7efa094bbd7310c8b2fd
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 9766
SHA256sum: 0bab17b957961a75d67d5c082839abd4be1e10a4cd3b1ae8244485ea4bde550c
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 11747
SHA256sum: a4ad8b867b0ed2ebcdef00b44272c26fd72491c9369d3fe7475c937e7639f906
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 40960
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 14496
SHA256sum: aadf95f8eb6a953b6a1dfa664f0c172ef6033f1ad27a724d2ea5ee66aa0665bb
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 9030
SHA256sum: f7787b7b9436a407907c852dc0a00fe52404839c50a46a4d405a0585d57bc251
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 3657
SHA256sum: 4ab0188206ef16bdaf6d5cf71ca53c5a175e0ba7b9d503c1c29c2d1fa7c4ea5a
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 184320
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 62285
SHA256sum: fd0ce667f87e4850f35baf47c022a7d10d6ca440d0d6e3a5196dde101bde7da9
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 6810
SHA256sum: 97b6400c1586fb864e5d396b15fe0f6c5c1beff1b5c9189219253204d5129f00
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 11095
SHA256sum: 15e6853c35974662685d7b1e88f9b4730d962ff2da93bb8b2403a0920baa260f
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 5081
SHA256sum: 78d1fcde3c57066a3bef29809ec50a53a55f53ea1c2dc53c8bbd00c6cbd77811
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 40960
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 16406
SHA256sum: bb0b2f7270bcd2b8f165c0c8be7226e87bb010854f17584c6bee5385a407ca1b
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 2350
SHA256sum: e3dbcde8890d8533baa6e6de2f719e7ccbc4c856af669afb69d8ac463ac7309c
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 1951
SHA256sum: dec620bb08df88751a2d08d40f08c65d7e44a2c58678a7e795339072a9fa2624
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 327680
Filename: olsrd_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 141881
SHA256sum: ddbda827911a6d4ca2ecb03f50829bf3be24b43dbf478ece5029e43d6a3d033e
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 368640
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_arm_fa526.ipk
Size: 162183
SHA256sum: 0fa8f8b4fffb63b557a1dade3b7fb6f64f85d96c6745482792b3b21a438b049e
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 358400
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_arm_fa526.ipk
Size: 158066
SHA256sum: cddde82cf5a16f36ca9894234c532bca0a6658f4bf078d420716d0517db6eb02
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_arm_fa526.ipk
Size: 2299
SHA256sum: b0ea394b561e2a0240c0efe3b65708a2384f1dde572603a4efe3b6652b9fc43c
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 532480
Filename: oonf-olsrd2_2022.08.25~1cec9b21_arm_fa526.ipk
Size: 234755
SHA256sum: 808d7fc6ec1f6994c75371d3e323c53ca0ff499f4b9d39f368d5b6116f5ef817
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: arm_fa526
Installed-Size: 563200
Filename: opennds_10.3.0-r1_arm_fa526.ipk
Size: 163525
SHA256sum: 13fe667070e3668a457066a86f488d1b197c9824d843d42b1e1fa01c536968ae
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: arm_fa526
Installed-Size: 194560
Filename: pimbd_2018.06.19~dbf4e591-r4_arm_fa526.ipk
Size: 83742
SHA256sum: 68fada062e86eafffd96f0308d7fdd1175672324d848781af3d86ea22d389a46
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: arm_fa526
Installed-Size: 81920
Filename: prince_0.4-r3_arm_fa526.ipk
Size: 28006
SHA256sum: 2a7b6a113e1a3bd82a87016a354d5b7990e802b81b54c29541f3470271cc7e1f
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: vis_2013.04.07~7710cce4-r9_arm_fa526.ipk
Size: 11123
SHA256sum: 6091e1dab94d8bd6d82d0793c17ec2667fb7e864ae5d045da2aa6d545acd3e34
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: arm_fa526
Installed-Size: 20480
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_arm_fa526.ipk
Size: 9039
SHA256sum: af4c065d23fad5c36d9ffdad5c7537a075866cbe040dff2097e69dd9d9dce90d
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.