Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: ahcpd_0.53-r3_aarch64_cortex-a76.ipk
Size: 24186
SHA256sum: f3a00f3a430a6ec22d31140208ac9c10ac31bb6c13562a51db151c793ba18001
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: aarch64_cortex-a76
Installed-Size: 143360
Filename: alfred_2024.3-r1_aarch64_cortex-a76.ipk
Size: 28861
SHA256sum: 7c6dfc45a2b19c3dd776458641f4e52d657da6122b253c830b10c0a572cff227
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_aarch64_cortex-a76.ipk
Size: 4917
SHA256sum: 5dba9f9650d4a01f46f1ff89c0b467be0f627f62b2f50c5c0200fa5523851452
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: aarch64_cortex-a76
Installed-Size: 153600
Filename: babeld_1.13.1-r2_aarch64_cortex-a76.ipk
Size: 69279
SHA256sum: 28456173f47098b64b28fd1f1364fbe667873896ca57e1e2e2e7422267126c53
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: aarch64_cortex-a76
Installed-Size: 143360
Filename: batctl-default_2024.3-r1_aarch64_cortex-a76.ipk
Size: 47225
SHA256sum: e069fa7db50d588ad8b1e2c070c6764daffacf9eb49bb088f08788f878555f2d
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: aarch64_cortex-a76
Installed-Size: 143360
Filename: batctl-full_2024.3-r1_aarch64_cortex-a76.ipk
Size: 54246
SHA256sum: 5a5d3a4e6c4c22b653d718d49a48f65713152bee1e72aa67b07b020768cb311c
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: batctl-tiny_2024.3-r1_aarch64_cortex-a76.ipk
Size: 16928
SHA256sum: e790584dbfa1cdb31beb9d8c7df26ce7dd74b6adce09356a4208885b22c5f4af
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: aarch64_cortex-a76
Installed-Size: 143360
Filename: batmand_1440-r1_aarch64_cortex-a76.ipk
Size: 45855
SHA256sum: cde558f085d9e018ccd46be48d18ca302b430293215c224e7c7503c36423267f
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: aarch64_cortex-a76
Installed-Size: 1075200
Filename: bird2_2.15.1-r1_aarch64_cortex-a76.ipk
Size: 395622
SHA256sum: 5a2e9e64ed0ae4abb9e48867590499007828e61bb86cfa401841ec2ca38a808e
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: bird2c_2.15.1-r1_aarch64_cortex-a76.ipk
Size: 11116
SHA256sum: 3dfa9d5ba9b2cb9774cc5b754a9bc24b9c0493c7d33e0c509cd07f1c3ea4b205
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: bird2cl_2.15.1-r1_aarch64_cortex-a76.ipk
Size: 9635
SHA256sum: 05fcd47e6d68a7ed3f8b34eb6a232962fa11cfb7cfe02f75af5e073a0f834a16
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 5012
SHA256sum: 7c126fec322859401dd605c31a3cc9fa128d1d3b4cda508aa988261b060452f3
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: bmx7-json_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 8974
SHA256sum: 69a05ba5f411c86c987afd4b1760caf33c7f3d42a472e9fc7335ba8709d84c30
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: bmx7-sms_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 6555
SHA256sum: 23c6c4653f4e8192da50ae8f64077e9d5e667940c415227f9287c4274d2c692c
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: bmx7-table_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 10981
SHA256sum: 0bb96503bb64396afeb2b48a21a89b03184556f1c267b3f148b7dde4738dd121
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: bmx7-topology_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 6004
SHA256sum: 004eaedb09aee3f4c2e6810205e422bde7a72593fef865509bd82a188803c041
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: bmx7-tun_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 27626
SHA256sum: 3308c207599b7a0b8e9050702b32bc39c4c61f98c982d73ef4e04e056c15d0e7
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: bmx7-uci-config_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 9624
SHA256sum: 3041481c57e16512d91bb8dc7112ebf959568627c19d7da2361f29dffb7fdcde
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 430080
Filename: bmx7_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 178520
SHA256sum: 44b761e78f7f37d5adbdb94c5b30eef19f4bdc721acf6f9820b8af169bf3a886
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: aarch64_cortex-a76
Installed-Size: 768000
Filename: cjdns-tests_21.1-r6_aarch64_cortex-a76.ipk
Size: 342470
SHA256sum: 996f83c200826a7fde310c9ff956e48a52d9c9c7a5d2aa02e63f835bfaf5e9d2
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: aarch64_cortex-a76
Installed-Size: 993280
Filename: cjdns_21.1-r6_aarch64_cortex-a76.ipk
Size: 404192
SHA256sum: 716ff8b77cc0fab45178ca9c71325a9857bc2a7e798635ccc4e1518fdb061e83
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: aarch64_cortex-a76
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk
Size: 1424
SHA256sum: 1f10577c575d7d073b74915605285d1c90dbd0c7205b8428086b98215f3196da
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: aarch64_cortex-a76
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk
Size: 958
SHA256sum: 2fb809be6e37d2ae8ee5113a47e5663d3747e7dc58dbd2b362d7d3249f319c04
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: aarch64_cortex-a76
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk
Size: 946
SHA256sum: 3f6c27d89cc8f9e5a985e4ef2da95de8a8d0d04f0c2507c3e6f7bf5ff8173315
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: aarch64_cortex-a76
Installed-Size: 296960
Filename: hnetd-nossl_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk
Size: 104018
SHA256sum: ed44bdf24b4e5da9f6c72255bb9bd4bbbaa940a896e0f1e26c04bd798f6a29a6
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: aarch64_cortex-a76
Installed-Size: 296960
Filename: hnetd-openssl_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk
Size: 114863
SHA256sum: ddc00b89022254a42fbdf23aaa924d2be386da94a60f80f78d02bb4a6a592730
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: aarch64_cortex-a76
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_aarch64_cortex-a76.ipk
Size: 6590
SHA256sum: 81dc7ac49fd9a1af7bfe1d747755c9875f3dd47bdc49453fddb7299e42857c44
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: aarch64_cortex-a76
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk
Size: 57624
SHA256sum: cf4a368c8189d94365c03a3287d654e12a3baa4c822081da083905503a667388
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7779
SHA256sum: 596767fec4e045b69d9d404a48564028110f0c54316a25143bd12fab05998091
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25669
SHA256sum: 15f78044bf83c22a9b21793f7ea6d6746fd84135860fbfbad583f220b1f4aa4f
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_aarch64_cortex-a76.ipk
Size: 7922
SHA256sum: 8a64701b26a5ab0189edeb6b4ee5342a6dcbd8103e1c09f7515bd007e33c7376
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2851
SHA256sum: a9a07dc66cb1afb09c2eae025ad20f1f3bee4ce83e3a2c0b9ee4bb9332cf6c56
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: aarch64_cortex-a76
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_aarch64_cortex-a76.ipk
Size: 33826
SHA256sum: e341944e28640f44337725e1d6c5a3074bc87cdd03a29b9243ce3db736ecf119
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: aarch64_cortex-a76
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_aarch64_cortex-a76.ipk
Size: 50640
SHA256sum: 80951181cb27b0d6d6f287dba047a252a51c23970345ddcb339c52cba4a9e301
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_aarch64_cortex-a76.ipk
Size: 12316
SHA256sum: 03522e33da05d4152c0b94ea98386d258e84e63c56532693d1a7b0ea18c26aee
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 2942
SHA256sum: bfa6266ef2f0195a4128836e1ee67195cee44d4bf240a702885d081f89faf370
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 14298
SHA256sum: 26a253f5dbc552904a306697ac1f118cbebffcb5f1640ff5915a05962b7dfa56
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 4888
SHA256sum: 35b319b5e73a748259a03742f81328435d5515dbf858cb414014f96a73a42151
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 3376
SHA256sum: f7e0b98b1d65cec3c4a4ccea73b03faebfc012caa67b13746174244c8f6986d6
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 5278
SHA256sum: 180612c7a04993cdb41ae2b05f428ffd0d1465af9b26db28d3d4737538ac7325
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 3654
SHA256sum: 63b4903c72711c0db871e3f15065e64f607ca0ceb89096a330fffd7b0095cfee
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 31777
SHA256sum: 253f3dccf178c8f2cd480ce85cff06bf0c72cf176ec86fb0ae2786e54f201304
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 24209
SHA256sum: 60747f0ef541e9caf5e447f0412ad2237b43802a7d73272e60a9afa8491169c9
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 10921
SHA256sum: 1914f30105c31efb5059b499281c2cc0879643e9a37930e0ed77d352f6724cbe
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 13319
SHA256sum: 80198c0001bfca2676f7357fdd8036666de840317c48eb3606fe94afb5480e1b
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 14993
SHA256sum: dbcbca52a5dcf7dabcb093fb222570f3ba235df3e3db007d7789b68d822f7aeb
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 10569
SHA256sum: 27f8d00489c9dc2c3abd17676466ab8b2e2899696f7ae4548234791cd6f78c53
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 3925
SHA256sum: dddf2d4534e86c57fe8c7e25f46e55a28a8454d507f4c9a82ce9ebca196dff41
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 337920
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 63351
SHA256sum: 0d550a05f79c741d09874182a09da49f1a3d0bfab6e7dc8363596cc830e07511
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 7795
SHA256sum: 320d749f41574071c3715297a2c500c922c77cb6700f58e0cc6d55acd44d5e8b
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 11797
SHA256sum: bd0472002fe1fb153e94028c0681859d7ecb9d246cf17af10e9b889463d85894
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 5785
SHA256sum: 95a9c5f88fd6bd32e6c90f2e4fc6f05a73038e5710c65a9f3ba6b855cbd4a1cd
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 16503
SHA256sum: 940df9b6aac557c774c5490fc490010dff4d8b15092d8828f50769a7323c4c54
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 2568
SHA256sum: 275443cf8b373523066f1a076dd750c35f91c29a91cd2a93c21373b1e6d06b08
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 1957
SHA256sum: 5404da22ffa568d0a21320032f293e445490f0ba85b51dccece238395ab813ad
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 368640
Filename: olsrd_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 146147
SHA256sum: 2a456e226911fe81adca3fa9b8b952d26fdd0753c32e943a948e2e64044a61c7
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 440320
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_aarch64_cortex-a76.ipk
Size: 182580
SHA256sum: 35c8d1b9c233ac39531363ceffebf2cdb2be5c56fd3503b1272d8c85603f563b
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 440320
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_aarch64_cortex-a76.ipk
Size: 177911
SHA256sum: 6f6526ba88eeeb6c67dce69c29fd767094f1b5ed5e0a0ba004af81a339b1683b
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_aarch64_cortex-a76.ipk
Size: 2302
SHA256sum: 7d4cb6eb01eae994066c67d459dfe9a95689f1fdde8e7cc2a4298bf1b2be2e35
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 655360
Filename: oonf-olsrd2_2022.08.25~1cec9b21_aarch64_cortex-a76.ipk
Size: 261641
SHA256sum: 62c58c8e3c42b79b3d16f714734fbbc670f69a40c836b487ebc4ab40c0096ce2
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: aarch64_cortex-a76
Installed-Size: 634880
Filename: opennds_10.3.0-r1_aarch64_cortex-a76.ipk
Size: 165447
SHA256sum: 5849e718410a428e0cf9bec7916afccf8626da6122c7c884502b72b8b163facf
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: aarch64_cortex-a76
Installed-Size: 225280
Filename: pimbd_2018.06.19~dbf4e591-r4_aarch64_cortex-a76.ipk
Size: 88268
SHA256sum: 877c56085ad292975d9681b35257fdab79867b793054769c667d9eca24d7200e
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: aarch64_cortex-a76
Installed-Size: 215040
Filename: prince_0.4-r3_aarch64_cortex-a76.ipk
Size: 37936
SHA256sum: 3567fff0328075dbae672b111cd0646df4621317beeb6d596f3484fcff62e779
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_aarch64_cortex-a76.ipk
Size: 12075
SHA256sum: f1e002555e09b5acf2f0b525f93a568601b306d5a77b34df7380878048064bd7
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_aarch64_cortex-a76.ipk
Size: 10048
SHA256sum: 132e79bfd5b828c17ce62a3c2326bf398b39e36f0d87b3a4c01c48fbc5b34be2
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.