Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 22970
Filename: ahcpd_0.53-3_mipsel_mips32.ipk
Size: 23750
SHA256sum: 91ecf68a6ad9f939731d1d7d1503ac9268cd93749f8d22d65812957ac8decbda
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2023.1-1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 26815
Filename: alfred_2023.1-1_mipsel_mips32.ipk
Size: 27737
SHA256sum: 8da5fbd86a1bb3080799e511f7d323489f277daa900e6fb35d032cb03acc02c3
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: mipsel_mips32
Installed-Size: 3963
Filename: babel-pinger_0.1-1_mipsel_mips32.ipk
Size: 4621
SHA256sum: c0a3598c89515f21132dd61b719b231187e4abb45b7d6331901f7500547eda60
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-1
Depends: libc, libubus20230605, libubox20230523
License: MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 63483
Filename: babeld_1.13.1-1_mipsel_mips32.ipk
Size: 64577
SHA256sum: eb1de3a25f9969fc1b981a7d2b7ce2a85f375a06f0e373605d580a38971f240a
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2023.1-3
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 41662
Filename: batctl-default_2023.1-3_mipsel_mips32.ipk
Size: 42455
SHA256sum: 7a83e87c60fbff6a1d550758b6f4951986cb0e29c88f35de10a7e1809aeecac0
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2023.1-3
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 48930
Filename: batctl-full_2023.1-3_mipsel_mips32.ipk
Size: 49539
SHA256sum: 2a1409399b1a0053e831385a4e931a665c1e35e295609cd65e72fce7aedc2183
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2023.1-3
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 13588
Filename: batctl-tiny_2023.1-3_mipsel_mips32.ipk
Size: 14491
SHA256sum: f90d85dd86e72c78f4b4d3204c63c264fbae2abdd9d53a4cdf5718c2c62524b6
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 39425
Filename: batmand_1440-1_mipsel_mips32.ipk
Size: 40134
SHA256sum: 466bdaef96402bcc5eea23f7f1838d4dec7bf183f62fcaca258a99bedf3e6e54
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird1-ipv4-uci
Version: 0.3-5
Depends: libc, libuci20130104, uci, bird1-ipv4
License: GPL-3.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 6834
Filename: bird1-ipv4-uci_0.3-5_mipsel_mips32.ipk
Size: 7869
SHA256sum: ce8da64ced6eb6bdbc38ab495361a08ac172dad9b570a6aa80097022312606b3
Description:  The BIRD UCI module (v1.6) (IPv4)

Package: bird1-ipv4
Version: 1.6.8-2
Depends: libc, libpthread
Conflicts: bird4
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 209918
Filename: bird1-ipv4_1.6.8-2_mipsel_mips32.ipk
Size: 210621
SHA256sum: 772740399ccedef1b4b44d6da496d53667b50b6d5781e1f7d1886132faf06c1f
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1-ipv6-uci
Version: 0.3-5
Depends: libc, libuci20130104, uci, bird1-ipv6
License: GPL-3.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 6004
Filename: bird1-ipv6-uci_0.3-5_mipsel_mips32.ipk
Size: 6967
SHA256sum: 3f9f2bfc64144a05dfe4868fe7b3a1a436ccc7128b951059f1080ac484511338
Description:  The BIRD UCI module (v1.6) (IPv6)

Package: bird1-ipv6
Version: 1.6.8-2
Depends: libc, libpthread
Conflicts: bird6
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 241267
Filename: bird1-ipv6_1.6.8-2_mipsel_mips32.ipk
Size: 242020
SHA256sum: 7bc9eb26c51ba5c492add86a5c5ce5aa47baa9fa4a9d50568affbb3d82d8bce2
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1c-ipv4
Version: 1.6.8-2
Depends: libc, libreadline8, libncurses6, bird1-ipv4
Conflicts: birdc4
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 8879
Filename: bird1c-ipv4_1.6.8-2_mipsel_mips32.ipk
Size: 9976
SHA256sum: 1ea8e78c22e64c884591d777d2400aba906a500b210ff11902433feaff103084
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1c-ipv6
Version: 1.6.8-2
Depends: libc, libreadline8, libncurses6, bird1-ipv6
Conflicts: birdc6
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 8934
Filename: bird1c-ipv6_1.6.8-2_mipsel_mips32.ipk
Size: 10023
SHA256sum: f0b742402cee976bb1ad6a3a3d53957f93e2a5c75cbadc90142891c7d4a96a0e
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1cl-ipv4
Version: 1.6.8-2
Depends: libc, bird1-ipv4
Conflicts: birdcl4
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 8296
Filename: bird1cl-ipv4_1.6.8-2_mipsel_mips32.ipk
Size: 9288
SHA256sum: 47ff9fb4daa6459c1952f12ca57f986cb87ebb7bd4dfda5da1f6cfd73de832b0
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird1cl-ipv6
Version: 1.6.8-2
Depends: libc, bird1-ipv6
Conflicts: birdcl6
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 8376
Filename: bird1cl-ipv6_1.6.8-2_mipsel_mips32.ipk
Size: 9376
SHA256sum: 8981064834247eaff54dc25a20ef5c35effa52deb3db14700cccfc4e0d8fd7da
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird2
Version: 2.15.1-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 396914
Filename: bird2_2.15.1-1_mipsel_mips32.ipk
Size: 395594
SHA256sum: 93ff6535350441a809ae78300be877feb8d049e5a6fab145bd5a06dd0820c0dc
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 9570
Filename: bird2c_2.15.1-1_mipsel_mips32.ipk
Size: 10523
SHA256sum: b232074d6bc1f5b940f5d0fab9301439152b2e70d78c916c8e30b1b9d21e97e1
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 8313
Filename: bird2cl_2.15.1-1_mipsel_mips32.ipk
Size: 9201
SHA256sum: 6d477fc07e8376092ffef7c43c8064c2aa443407d2fb6e6cbf1543c588c55f13
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: 7.1.1-5
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 4025
Filename: bmx7-iwinfo_7.1.1-5_mipsel_mips32.ipk
Size: 4651
SHA256sum: f026635fff3cb35a853565364a3b9f5d7863c5192215fb5936dd3b40ee1ec32e
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-5
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 7958
Filename: bmx7-json_7.1.1-5_mipsel_mips32.ipk
Size: 8636
SHA256sum: 89d53f777a84f2fd5fda61312aa4a06883af78bbd3998eb89130d6b6c9fe30cb
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 5526
Filename: bmx7-sms_7.1.1-5_mipsel_mips32.ipk
Size: 6091
SHA256sum: a379a5a66effa50d78c240da731672cd3f1e9a7668c83650b64747a0ff42a547
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-5
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 9497
Filename: bmx7-table_7.1.1-5_mipsel_mips32.ipk
Size: 10152
SHA256sum: 4945eee070448071c73cbb90f632f082c24b3fe2768ed277990f21771ccc8492
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 5094
Filename: bmx7-topology_7.1.1-5_mipsel_mips32.ipk
Size: 5665
SHA256sum: 61d05407c6302f17105a1bd492fd6ef1dd47fff047d818fc4201d371d256a50c
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-5
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 25335
Filename: bmx7-tun_7.1.1-5_mipsel_mips32.ipk
Size: 25955
SHA256sum: bf217abe1db9d07c19e76f4d9d63cc1d0fdf5292cca4a2c3d0c34055faefd20e
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-5
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 8094
Filename: bmx7-uci-config_7.1.1-5_mipsel_mips32.ipk
Size: 8826
SHA256sum: e3df62f80bcaa8954acd0c0f68610ac83d197d7a34375d570cdf1073812b802c
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-5
Depends: libc, zlib, libmbedtls12, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 178190
Filename: bmx7_7.1.1-5_mipsel_mips32.ipk
Size: 178676
SHA256sum: 3fd629ba92bfe4a5af2792c3646d138100d08f16b5b7a0938037e9a48139733d
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: v21.1-4
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 379010
Filename: cjdns-tests_v21.1-4_mipsel_mips32.ipk
Size: 378749
SHA256sum: 0f3cec2a53097406f99c29dc498291c67354e5eb844825a3ce644a498a075a65
Description:  cjdns test cases

Package: cjdns
Version: v21.1-4
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 456677
Filename: cjdns_v21.1-4_mipsel_mips32.ipk
Size: 456539
SHA256sum: 7c016698033fb845e73e42e6e18c950ec38772e284f34aa94a64c56d7514bcbc
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 545
Filename: hnet-full-l2tp_2018-12-21-c4376661-1_mipsel_mips32.ipk
Size: 1394
SHA256sum: bb7a2192f25fa0399069f19ab7768ff2c896c16f47c0bcaa65b6d19f3dc178f3
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 95
Filename: hnet-full-secure_2018-12-21-c4376661-1_mipsel_mips32.ipk
Size: 927
SHA256sum: 37513a9dbe920dc13376f0a9ab285c181e478f5a4b9b500cd9bc2bb202eac152
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 95
Filename: hnet-full_2018-12-21-c4376661-1_mipsel_mips32.ipk
Size: 915
SHA256sum: c89dc11456a6a66107f12a5444b2a3a5356221126de6397bb3bf99da821d391c
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 96379
Filename: hnetd-nossl_2018-12-21-c4376661-1_mipsel_mips32.ipk
Size: 97332
SHA256sum: db4b5a8de95947e816914fa87cfbda752482a2f7221eb8236c7357b687654144
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 106704
Filename: hnetd-openssl_2018-12-21-c4376661-1_mipsel_mips32.ipk
Size: 107441
SHA256sum: 3207040591f14af7e90ba29ddb4b57784667b09037805575364c380868db0cf4
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-bird1-ipv4
Version: 0.3-5
Depends: libc, luci-base, luci-compat, bird1-ipv4-uci
License: GPL-3.0-or-later
Section: luci
Architecture: mipsel_mips32
Installed-Size: 7425
Filename: luci-app-bird1-ipv4_0.3-5_mipsel_mips32.ipk
Size: 8246
SHA256sum: 8c39ea21ca3b2b52b09e956ed032a67bc47708df07ea4de8616dfcd21e0e8925
Description:  LuCI support for BIRD (v1.6) (IPv4)

Package: luci-app-bird1-ipv6
Version: 0.3-5
Depends: libc, luci-base, luci-compat, bird1-ipv6-uci
License: GPL-3.0-or-later
Section: luci
Architecture: mipsel_mips32
Installed-Size: 7471
Filename: luci-app-bird1-ipv6_0.3-5_mipsel_mips32.ipk
Size: 8278
SHA256sum: 54fda83452a19e6f69a12a673a1812cf4d2fa9c46892aaa7b2f2ccc8bacc8025
Description:  LuCI support for BIRD (v1.6) (IPv6)

Package: luci-app-cjdns
Version: 1.3-9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
Architecture: mipsel_mips32
Installed-Size: 5674
Filename: luci-app-cjdns_1.3-9_mipsel_mips32.ipk
Size: 6563
SHA256sum: ea16f2c35a9dc2170d8119889e6dcd2ac34b5a89eedd1353d36f9f25543da150
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018-12-21-c4376661-1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mipsel_mips32
Installed-Size: 56779
Filename: luci-app-hnet_2018-12-21-c4376661-1_mipsel_mips32.ipk
Size: 57616
SHA256sum: 3d21024d105f5f7a7d51f7e10f1d66b0011fefef623628452a035d030776b72e
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-14
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 6973
Filename: luci-app-olsrd2_0.2.6-14_all.ipk
Size: 7849
SHA256sum: 8db529aed6b96138b5de05e0b0ec90d8f23eb1ca3168d08c04fa234a067cbaf0
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017-08-24-93b5ace4-9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 119316
Filename: mcproxy_2017-08-24-93b5ace4-9_mipsel_mips32.ipk
Size: 119988
SHA256sum: af0ba58f8a6a67b09cda8a77cb39641d2eef52b5b51ce37d374e803fcd644248
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 4.1.1-1
Depends: libc
License: GPL-2.0-or-later
Section: net
Architecture: all
Installed-Size: 24096
Filename: mesh11sd_4.1.1-1_all.ipk
Size: 25644
SHA256sum: 1818a94c60050cb49524608bed7b5e99677d7b66d314f235c63adcc1bdc7667f
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014-12-12-2d6d1b0b-7
Depends: libc, libubox20230523
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 6588
Filename: minimalist-pcproxy_2014-12-12-2d6d1b0b-7_mipsel_mips32.ipk
Size: 7584
SHA256sum: 36fd8075d6ab5a6726fd7550d13f12e6fc018bd3464d48934f39d554ddbcf193
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 1947
Filename: naywatch_1-7_all.ipk
Size: 2852
SHA256sum: 2eba083d0b2daa960aadedbb04ccaac03cab8530d4807381b3d998c7cfcd3f66
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 30602
Filename: ndppd_0.2.5-2_mipsel_mips32.ipk
Size: 31153
SHA256sum: 9f97ebf1a9974b6a408640d8d74d6bbc41a5624bb1f46ed88457d91e5dd8e36a
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 45616
Filename: nodogsplash_5.0.2-1_mipsel_mips32.ipk
Size: 46248
SHA256sum: c2f900ec38031b980ad227a19d80b2958eeefde4c7f0b94d3a65f26650f4b3ae
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox20230523, mdnsd
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 11302
Filename: ohybridproxy_2020-05-22-0dfef1eb-3_mipsel_mips32.ipk
Size: 11985
SHA256sum: e84d35a6f2bafebcbe39a010c745c103dfc30de7901d3dac33193dfea09d0ec9
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 2041
Filename: olsrd-mod-arprefresh_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 2703
SHA256sum: b574021774e2581187b77145d66a4f969b406f499c03e0a904c061ec46f8e41b
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 12057
Filename: olsrd-mod-bmf_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 12801
SHA256sum: 4bd276e3c754f2e0424b65172ca19861c503147562a57d4d9354056008663a64
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 3819
Filename: olsrd-mod-dot-draw_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 4421
SHA256sum: 534ec13dbc7d327debd1770afe69fa111e75e22c9ecd9a57cfdb0f7f430a5bc2
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 2393
Filename: olsrd-mod-dyn-gw-plain_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 3025
SHA256sum: 4befa9ed4e93f11e1572c8f9e2fa1d5ab8fe3827fe20cad180ff5e3a8ee268e3
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 4229
Filename: olsrd-mod-dyn-gw_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 4823
SHA256sum: f1cba7bb1d8b498f21c2503f289216df65ef4c7efb85976922622a3f51eca219
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 2577
Filename: olsrd-mod-filtergw_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 3206
SHA256sum: 32f51db85c8d92b9b3c47ad1e51c4e7f313dd25ce136d68d78a814da540f9548
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 31158
Filename: olsrd-mod-httpinfo_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 31693
SHA256sum: 44a81d771b5b2cf19b9715c87f62a807b5bfa8fbe4f450c85ded33da8f5cb7d7
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 23019
Filename: olsrd-mod-jsoninfo_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 23715
SHA256sum: c1ec0746a89ed48de2562714e0b23ac488596ccf34defa1341b81c0ecfb72300
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 8878
Filename: olsrd-mod-mdns_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 9538
SHA256sum: 7aebeb1152428297de77a5729dc7ed8d876ecce90a6aac73a2de150c3b8fd8ba
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 11333
Filename: olsrd-mod-nameservice_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 11954
SHA256sum: 8a820b65df92423822753537c88338582cdfc0554f795f1f1b8a6d59941090dc
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 13353
Filename: olsrd-mod-netjson_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 13969
SHA256sum: 778ebd1c92e51f36ae5abecc7d9d94361c2342838a9536ddecd2e98d403aeb47
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 8541
Filename: olsrd-mod-p2pd_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 9201
SHA256sum: 5ff149701eca8af4eb5c674d0ced179c88c308018d5546302243b34369f6211e
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 2947
Filename: olsrd-mod-pgraph_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 3574
SHA256sum: 670bc563cfa189e27b19d5dcbfd7a98873e08d37d82cd4359a9d66170cb876ab
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 62471
Filename: olsrd-mod-pud_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 63107
SHA256sum: 09d645a23d2fad219ede9b883e10089109ae6b579e7c848e89b85bca91f1a5b3
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 6212
Filename: olsrd-mod-quagga_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 6931
SHA256sum: 5107f03db22369edc9c6391479d569a9ce17422963f0b19cd0a05e2cc270fff6
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 10355
Filename: olsrd-mod-secure_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 11019
SHA256sum: 349c5e20c3cf4f8791a5139baa14dd54127edc96e9f5ac791c264815781dfd6e
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 4517
Filename: olsrd-mod-sgwdynspeed_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 5160
SHA256sum: 2330e36149444bedbc6baad5674eb12a39b756fb7f6d22e38008918bab362fd4
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 15149
Filename: olsrd-mod-txtinfo_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 15742
SHA256sum: a8a3175192206c7fc914d6455222dda9b86fca092f4c0dd022763e205d3a98bb
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 1714
Filename: olsrd-mod-watchdog_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 2381
SHA256sum: 5e919954224fcf33e81f006e6a7875f0d19489bb567e3ac681d078ffb0048ead
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 1179
Filename: olsrd-utils_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 1931
SHA256sum: b0783462bed01a29c2c9c0597a2bb7f2d5268868585d212638c3c0213e2e2dad
Description:  Utils for OLSRD

Package: olsrd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, libpthread, libubus20230605, iptables, ip6tables
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 139607
Filename: olsrd_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 140334
SHA256sum: b604ee07a1cf437189ed1ba537a62bae7969531e09d73249d6df57a1aba9b6e7
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mipsel_mips32
Installed-Size: 159961
Filename: oonf-dlep-proxy_2022-08-25-fb15d54d_mipsel_mips32.ipk
Size: 160470
SHA256sum: 499765542ed5220fdf42c2c3512c592ea7264bb6ee3d182503d56fccf229b1b2
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mipsel_mips32
Installed-Size: 155978
Filename: oonf-dlep-radio_2022-08-25-fb15d54d_mipsel_mips32.ipk
Size: 156585
SHA256sum: 97005cdf13e4f7ed1d8b6efe078d7b8cb0fdb66b9e2a211bb16448330e3374df
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: mipsel_mips32
Installed-Size: 1545
Filename: oonf-init-scripts_0.9.1-r3_mipsel_mips32.ipk
Size: 2278
SHA256sum: c95f8942780024c27ee7f98c832fae3a8343fe21c43a554d2c15bd94fa8fde89
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022-08-25-1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mipsel_mips32
Installed-Size: 232437
Filename: oonf-olsrd2_2022-08-25-1cec9b21_mipsel_mips32.ipk
Size: 232774
SHA256sum: 1c60ff349eb58292064b54c9f297da2a28f9643abf8f6316078bb3bcda3ec29b
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 159721
Filename: opennds_10.3.0-1_mipsel_mips32.ipk
Size: 159030
SHA256sum: 50bd94bf44a2420b3ecf5040b1cd7801585ed398a0fb5f4fcbc1e59cd79d70d8
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018-06-19-dbf4e591-4
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 79023
Filename: pimbd_2018-06-19-dbf4e591-4_mipsel_mips32.ipk
Size: 79830
SHA256sum: 1857f4944d759074448870d0a83a8a8b79658493c370d4868f767c8dcb7d777c
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 33341
Filename: prince_0.4-3_mipsel_mips32.ipk
Size: 33981
SHA256sum: f7bc8ca25ea3a59afd2ad3ac88a6cf29c131e3055929aacaf3c6b72d420c75d2
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: quagga-bgpd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 202464
Filename: quagga-bgpd_1.2.4-2_mipsel_mips32.ipk
Size: 201530
SHA256sum: 559acea554c47e0bd5e4d646cc0ff0fdf3402ad53497ca2f7bdba4cca4c47665
Description:  BGPv4, BGPv4+, BGPv4- routing engine

Package: quagga-isisd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 90097
Filename: quagga-isisd_1.2.4-2_mipsel_mips32.ipk
Size: 90566
SHA256sum: ceca357e0d2ddc0391ff8cd97c04acb1a6f715f3d570bb3782984364c0e4c66b
Description:  IS-IS routing engine

Package: quagga-libospf
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 181033
Filename: quagga-libospf_1.2.4-2_mipsel_mips32.ipk
Size: 180876
SHA256sum: 94e84d94223c31339bc5ba6dd4ec3e5b11ab52d6e0ded9963b14d8fb15500618
Description:  OSPF library

Package: quagga-libzebra
Version: 1.2.4-2
Depends: libc, quagga
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 128979
Filename: quagga-libzebra_1.2.4-2_mipsel_mips32.ipk
Size: 128811
SHA256sum: aa863118e4a3548aa4ec8db6582f2860c6d1e329a2dada3dde7804895aba6cac
Description:  zebra library

Package: quagga-ospf6d
Version: 1.2.4-2
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 85707
Filename: quagga-ospf6d_1.2.4-2_mipsel_mips32.ipk
Size: 85937
SHA256sum: def466d95902979b43516e616257438a097861e3c40026924e736fc0f8647caa
Description:  OSPFv3 routing engine

Package: quagga-ospfd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 3766
Filename: quagga-ospfd_1.2.4-2_mipsel_mips32.ipk
Size: 4408
SHA256sum: 2718e80388d5743fbb83cd4d472c597dd63826f43d3a03e6e15a578fe4197391
Description:  OSPFv2 routing engine

Package: quagga-ripd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 35170
Filename: quagga-ripd_1.2.4-2_mipsel_mips32.ipk
Size: 35389
SHA256sum: f1e6bcafce7b1267d73cfba708586455dce9daf96c40710f919d2057e77dbf3d
Description:  RIP routing engine

Package: quagga-ripngd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 29361
Filename: quagga-ripngd_1.2.4-2_mipsel_mips32.ipk
Size: 29693
SHA256sum: 7ad744fe343e26a72e5de4b3101945e615ab817abcd0a98e21209cbee5cd619d
Description:  RIPNG routing engine

Package: quagga-vtysh
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra, libreadline8, libncurses6
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 129588
Filename: quagga-vtysh_1.2.4-2_mipsel_mips32.ipk
Size: 130045
SHA256sum: 1dae872b4fc51b061b51e6bcae839b52598f13c87ce0183c67bcde174d35c66c
Description:  integrated shell for Quagga routing software

Package: quagga-watchquagga
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 11506
Filename: quagga-watchquagga_1.2.4-2_mipsel_mips32.ipk
Size: 12131
SHA256sum: ab4d0697de3d54b397de23830da43dedd52b1f5c52e82e820dd9f41376a9fd59
Description:  Quagga watchdog

Package: quagga-zebra
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 87132
Filename: quagga-zebra_1.2.4-2_mipsel_mips32.ipk
Size: 87293
SHA256sum: 91f1999228488c6cf09d62ffcf179b8fa630a8b2c93cdab63184e87bc3498a77
Description:  Zebra daemon

Package: quagga
Version: 1.2.4-2
Depends: libc, librt
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 2382
Filename: quagga_1.2.4-2_mipsel_mips32.ipk
Size: 3201
SHA256sum: b7207cf87897f74d9da0bf675646a1c4f5e2f35248ee54eaa62c67ae9a60644d
Description:  A routing software package that provides TCP/IP based routing services
 with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2,
 OSPFv3, BGP-4, and BGP-4+

Package: vis
Version: 2013-04-07-7710cce4-9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 10460
Filename: vis_2013-04-07-7710cce4-9_mipsel_mips32.ipk
Size: 11121
SHA256sum: 1273d0fdc2d89d3e462cba893399630af8e9bcec25ec3b0aacd952d42de5deea
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox20230523
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 9131
Filename: zonestitcher_2020-05-22-0dfef1eb-3_mipsel_mips32.ipk
Size: 9803
SHA256sum: f4759f55a9f76d0bd204526a428bc9f35fe6beb024b82b9c445ac58c2bf84ee3
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.